Viewing all customer Discussions for:

Other

Hi, I think I need the spiral and the parts to attach it to window.

Hi, I have a few windows in my house that have balance systems that are damaged. I'd like to know if they are repairable. Are you able to tell from the pictures attached?

Please check my measurements - I see width in photo showing between 6 and 7 inches - looks like 5/8". Also, I see height a 5/8" in photo between 10 and 11 inches. Not sure - could be 9/16ths, so I need your help. The metal to metal length is 18" and the channel clips at the end have "wings". The ... (cont.)

Hey, Do you have the replacement strips for a Pella door in sandstone. and the part number please.

I need to replace the balancers in my windows. The balancers have 3 different numbers on them for the three different size windows. The numbers stamped on the current balancers are: C46#23884 E99#27984 B364#19381 Could you please let me know which balancers are the replacement for the balancers cu ... (cont.)

I have this rubber piece that slides into the bottom of my storm door. It's 3/4 of an in wide, then the height of the 3 ribs are 1/2 in tall do you have anything that mite work. It just slides into the track. It was and Emco storm door.

looking for the correct part number to order on the back there is 11600-3 the front is a bit harder to read I believe one of the number is 11600-17 The attached picture shows a number of E25 9#27 5-85

Hello. Have some stripped gears on this window crank. Can you give me an idea of how much it would cost for the replacement part?

Can you identify this window seal?

handle came out of housing so need all new mechanism with 20755 on part near bottom right of window

Hello,I am unable to identify this sash carrier. Can you help with the correct one to purchase. I recently ordered channel balance ( the original ones are 2630) and sash carriers - order#1406386. I believe the channel balances are correct but not sure about the sash's. Can you please help and guide ... (cont.)

LOOKING FOR REPLACEMENT HANDLE LIKE THIS ONE DOUBLE LOCK

I will need 4 of this balances Thanks

Looking for replacement part for Gerkin vinyl widows. Thanks for any help Tom

Hi, my outside portion of my patio door handle broke off. I need a complete interior/exterior handle replacement 4-15/16 mortise compatible. Do you carry a style for this? I keep looking but my current screw holes are on the face of the handle... i've seen your 82-081 style but the screw holes are ... (cont.)

Hello, I'm trying to find a replacement pivot shoe. The part is 2 inches long by 1.25 inches wide, and 9/16 inches thick. The number on the part is 4610.108 and the window was made by Rivco in 2000. It has an "open" top allowing the window pin to slide in from the top. I'm confused why a number of ... (cont.)

The balance is one long spring with a clip on the bottom as shown in the attached pictures. I believe they are crestline windows from the 1980's. Many of the clips (like the picture) are broken. In addition to the part identification, do you know if I can just replace the broken clip or if I need to ... (cont.)

Need to replace wheel and need screws as furniture was taken apart to move and placed back together. Some of the screws are now missing.

The stamped print says Nordahl Burbank California. The roller is from a pocket door, house built in 1951. Might be original. Thanks

Looking 4 a new window lock, i have a few broken ones