Viewing all customer Discussions for:

Other

I have this rubber piece that slides into the bottom of my storm door. It's 3/4 of an in wide, then the height of the 3 ribs are 1/2 in tall do you have anything that mite work. It just slides into the track. It was and Emco storm door.

looking for the correct part number to order on the back there is 11600-3 the front is a bit harder to read I believe one of the number is 11600-17 The attached picture shows a number of E25 9#27 5-85

Hello. Have some stripped gears on this window crank. Can you give me an idea of how much it would cost for the replacement part?

Can you identify this window seal?

handle came out of housing so need all new mechanism with 20755 on part near bottom right of window

Hello,I am unable to identify this sash carrier. Can you help with the correct one to purchase. I recently ordered channel balance ( the original ones are 2630) and sash carriers - order#1406386. I believe the channel balances are correct but not sure about the sash's. Can you please help and guide ... (cont.)

LOOKING FOR REPLACEMENT HANDLE LIKE THIS ONE DOUBLE LOCK

I will need 4 of this balances Thanks

Looking for replacement part for Gerkin vinyl widows. Thanks for any help Tom

Hi, my outside portion of my patio door handle broke off. I need a complete interior/exterior handle replacement 4-15/16 mortise compatible. Do you carry a style for this? I keep looking but my current screw holes are on the face of the handle... i've seen your 82-081 style but the screw holes are ... (cont.)

Hello, I'm trying to find a replacement pivot shoe. The part is 2 inches long by 1.25 inches wide, and 9/16 inches thick. The number on the part is 4610.108 and the window was made by Rivco in 2000. It has an "open" top allowing the window pin to slide in from the top. I'm confused why a number of ... (cont.)

The balance is one long spring with a clip on the bottom as shown in the attached pictures. I believe they are crestline windows from the 1980's. Many of the clips (like the picture) are broken. In addition to the part identification, do you know if I can just replace the broken clip or if I need to ... (cont.)

Need to replace wheel and need screws as furniture was taken apart to move and placed back together. Some of the screws are now missing.

The stamped print says Nordahl Burbank California. The roller is from a pocket door, house built in 1951. Might be original. Thanks

Looking 4 a new window lock, i have a few broken ones

Window decal says hlc 3554 by 96 also h lc50 52 x 76 the balance is 37 in metal to metal

this is a truth casement operator off a marvin casement need to try and match it 11062001 1802 45251 this is the only numbers i see on it

I don't know what brand of tilt window it is. Got it from lowes. I have some Pella windows but they are labeled Pella on the window locks and this one has no name on the locks. I did find a number on it 4810108 and before that is Pat. So I don't think it is a part number.

Could use 2 pair

This keeps the door in the bottom track. Do you have anything like this?