Viewing all customer Discussions for:

Other

I need to replace one operator on a Lincoln window and one operator on an Anderson window (pics attached).The operator on the Lincoln is marked "Truth".

Looking for window tilt catch

Hello! Looking to replace these operators. Sorry no installed photo, already took them out. Hopefully a photo of the opening is sufficient.

I removed the old balancer. I only need the stainless coil. Has 7R on the plastic housing. It has a light blue pivot. The coil is stamped 8ED and has 2 holes exactly like your series 180. I'm not sure of the weight. maybe 6 or 8 lbs. Thanks for your assistance.

I want to make sure I get the correct part. I have the part number for the crank but need a replacement for the sliding hinge. Thank you.

Trying to find the brown plastic piece that is on the drawer guide,

I need to replace this broken Milgard window crank right handed

Can you tell me the part(s) I would need to make this door lock again?

4 hinges strip

was originally white, Number 3 on underside left of cam in picture 281 attached, width is 1" with cam unlocked, 1 3/16" cam fully extended, and 1 1/8" fully locked, screw holes are 2 1/4' on center, the cam is 3/8" thick and 3/4" wide

35 year old window. Window will not open past 2 inches. Part is screwed in with a Philips screw.It is a vinyl window. It is stopped by this broken piece.

It's the brown part on the end of the drawer guide

Hi; Attached is photos of Wright 07900 casement operator. Do you have in stock the right and left hand replacement for this brand as well as handles? Also I'm looking for lock lever shown in 0224, I believe its a Silverline window.

Hi! I have 50 year old slider windows with no identifying name or number. The steel wheel is broken but the casing is intact. I need the correct size wheel and axil. Hope you can help me! Thanks!

Could you help me to id this rainstrip? I am guessing your product code 58:178 is a match for replacement. Thanks

I need to buy the Tilt Latch Actuator spare part, it has a broken leg and it seems that it is not manufactured, I can replace it with part 26-215, which comes complete.ThanksHernan

I'm looking for three left and three right operators.

I am repairing a single hung window. I removed the channel balances, and they are not the same. No wonder why it broke. A single spring on a wide window is less than adequate in my mind. I would have preferred two springs, one on each side, I presume they should be weaker springs since there are two ... (cont.)

Window balancer. Please see photo and advise as to how to get a replacement for this balancer. Thank you!!

I received the parts today and I installed two of them. They fit just fine, but the springs seem to be weak and do not hold up the window. I'd need to return them back to Swisco and order the correct/better part. So what would you suggest? The info stamped on the old balance: 32-5 JD5 CMC 54 Than ... (cont.)