Viewing all customer Discussions for:

Other

hello, First of all let me say that you have one of the most helpful websites that I've encountered in the entire field of home repair. Thanks for that. I need to replace the channel balance on a 33" wide sash window. The only markings on the balance are in the attached photo: 29 3 LS CALDWELL. ... (cont.)

Please send cost for these 2 parts. Grey or white Thanks

Window is from the company Empire Pacific Windows. The letter L is on the lock, also 8-9 it is white in color.

I have old style crank out windows. Theses clips hold the window screens in place.

We recently purchased a house and realized that none of the windows close completely, and several of the upper sashes won't stay up when not latched. On removing the sashes, we found that none had pivot bars although the frames have balance shoes in them. It's not clear whether all the bars broke ... (cont.)

Hi, The vinyl "trim that seals the windows on the outside got damaged at the top of the window. It seems to be a thin piece of vinyl that goes between the glass and window frame all the way around the window. Though only the top part is damage. Please se attached image. Can you please advise on w ... (cont.)

Need some of them plus at the top off the moving vertical slider there are retaining clips that allows you to tilt the window back for cleaning. These break on a regular basis

American craftsman sliding Patio door replacement rollers

I believe my bronze, right 20 wide x 44 tall casement window is a Superior Window Products. It was installed in 1997. I believe that Superior Windows was acquired by Atrium Windows (aka Hr Windows) in Texas The riveted stud broke off from the stud bracket. The crank assembly works fine. I would ap ... (cont.)

Hi. I'm looking to: 1. replace my white KK cranks and cover with bronze Folding cranks 2. Replace my white locks with bronze locks What parts do I need? Thanks.

this piece is nailed to the bottom of the drawer and serves as a guide to hold the drawer on track during pull. under it is a 1x2 wood slat holding up the drawer. it got bent, jammed and lost one of the side rollers when we had removed the drawer. Without it, drawer is unserviceable. ... (cont.)

The 3518 I need 4 The 3020DS i need 8

I have Stanek windows that tilt in for cleaning. The left latch that locks in the window snapped off. I need to replace the little plastic corner piece. Can't find it anywhere. Have tried to contact Stanek bit they are no longer in business in my area.

Need crank assembly and is there a spammer tool to tighten up the play in the crank

I need 2 Lawson spring window balances the numbers stamped on the piece are 29DS. 38GP

I'm looking for window parts can't seem to find them. Do you carry these parts or do you know who would? I do not have any other photos of the tilt latch would you happen to have anything close to that photo? I do see a screw hole in the latch just one. Also seeking a window pull. ... (cont.)

I need one truth sentry awning window motor, and 2 motor m ounting kits. Thanks, Steve

The window opens to the right. The base is 1" high and 2 and 7/8" wide and the fully extended arm is 12 and 1/2" out to the bar that attaches to the window. That bar has three screw holes. The screw holes on the base are 3 and 3/4' apart and the screw hoes closer to the window are 1/4" higher tha ... (cont.)

I need the weatherstripping or seal for this door. I believe it may be a Crestline door. My best quests is that it may have been installed in 1993. Please help. The only marking on the door is a number on the metal window frame.I have included photos of:1. The three panel door2. The weatherstri ... (cont.)

Spring is broken.