Viewing all customer Discussions for:

Other

Hi, The channel balancer says 2530 BSI V6 on it and came from a single hung, double pane, vinyl window made by International Window Corporation. It is 1/2 wide (9/16). Thanks!

Our tired old windows are starting to fail so it's time for new Channel Balances. The current balances are 26". Attached are pictures of the end guides as well as the number stamped on the balance, 2540 DD BSI. On the window we're working on, the block and tackle has several broken parts so we'll b ... (cont.)

Hello, the Window Channel Balance is 24 inches long, 1/2 inch wide and has a stamp of 2340 on it. Thanks for your help. I would like to replace them.

These were removed from the windows. They are broken but I think you can ascertain the part for purchase as replacement. Wonder why the numbers are different. Window broke due to plastic retainer peice deteriating over the years. Your help is appreciated.

My storm door latch has broken and I'm having a hard time finding a replacement that works as this door is probably 20 years old and is no longer made.

One has a spring on one side one does not.

Sliding glass door latch to be replaced

Hi,I'm trying to find the parts to repair windows in our Florida room. I looked at several channels and can't really find any part numbers other than the numbers in ch4.jpg. Any help in identifying a part number would help a lotThanks,Doug

Hello, I am trying to identify some casement cranks & casement locks. Wondering if anyone remember seeing these. The casement lock seems to match the windows moulding lines profile so I am sure I'll need to find a direct replacement. The crank handle is a small profile.

I have a bay window made by Caradco installed in 1985. The window has 4 panes and only the one on each end opens. I would like a new crank for both

Can you tell me if these clips shown (one is broken) are the 70-048 clips you have in stock? I've read where there maybe an older version that may not work. Thanks for your help.

One is a sash balance; the metal part is 33" The other is a connection between two shelves (just trying my luck if you have it)

The window cranks open the glass louvers. They have a black band (rubber) that is worn out on most cranks. Do you carry this version?

More pictures

The crank operator opens an Andersen window with its hinges on the right side. The operator has a folding handle and is off center. The arm that is attached is two sections. The first is smaller...about 2 inch to the hinge. The last section is about 6 plus inches and has the slide clip at the e ... (cont.)

This bead is off of an aluminum double hung window from the mid 1970's the windows have interior storm windows built into them. There's no brand or id numbers that I can locate. I would need approximately 200 feet.

U need to replace a lot of the window trim in my late 70s home in Indio (very hot summers). I have attached pics of the plastic parts and would like to know if you have any recommendations

5 inch on center holes. Looking for a replacement because mine broke but wanted to get the right one

4" length, 1 5/16" wide. One screw post. I do not have a picture of the original part, it disintegrated when my technician removed it. I only have a diagram.

I'm looking to replace the locking mechanism inside of my patio door handle. It seems to be a unique part. Any help is appreciated