Viewing all customer Discussions for:

Other

If anyway you can help me find this parts. This part will hold mullions in place also need the one for the middle section that will hold the cross mullions in place. Thank you.

Hi Guys , We are kindly ask for your help to identify the operating crank system that broke. Arms look in a good condition so its only the crank system. Thank you Benny

These belong to vinyl windows.

Good morningI am looking for this part Approximately 1 1/4". x 2". x 9/16"If you need more info let me know. Thank youSteve

I need the block and tackle for the upper sash. The number printed on the block and tackle is 25c bj5 cmc5.Thanks,Kent

I need a replacement 35/92 mortise lock for back door. The door is part of a larger unit which locks with a French door and was originally made by Bonneville Solutions in Canada. The lock does not have a faceplate and was attached using 3 torx screws to a metal strip that ran the inside length of ... (cont.)

Looking for glazing bead. Sorry for broken piece. Early 80's Pennco window.

How or Why does the spiral sash loose its tension if the window has never been removed, only tilted in for cleaning?

I'm looking for new rollers and the Complete locking device set with keys for my sliding door. I will provide the model shown for the sliding door. Please advise, Cassidy

The code on the bar is: 1120 BS RB 12 inch long

Hi, I am looking for right sized window balancer and matching pivot shoe, I have attached old pics herewith, could you help me find these parts? A lancer size is 20"

Hi Sir My shower door wheels are broken. I need four wheels or 5 wheels I uploaded photos from different angles. King glass is company name . It's photo is there too I wheels dimensions is almost 22 mm diameter around 5.5 mm thickness of a wheel. Glass thickness is approx 8 mm If u need more info ... (cont.)

Hi, looks like you guys can help me but I wanted to make certain you had all the parts. I need the balance and the shoe but I also need the metal piece that comes out of the window. That piece is a 2 1/2 inch long metal channel that is about a quarter of an inch wide and is what fits into the shoe. ... (cont.)

This handle from an old sliding door (from the 80's)has totally broken so I'm wondering if I can find a replacement? This is just one side of the handle. Although this part is broken, I think I would actually need both side to screw it on. Is it possible to get a replacement? From where? ... (cont.)

No numbers or markings.

Hello, I have several windows that only had these parts in them. None of the windows in the house have a complete system. I was wondering if you could help identify these parts. I have been told that they are from a block and tackle system. I did not see that on your website. The show measures as ... (cont.)

Looking for replacement window cranks for old aluminum windows

Described by Truth as part 40.11 and 40.12 (14011/14012).

This is a 6 foot Pella doorwall installed around 1993. The weather strip is split and needs to be replaced I haven't taken the door off yet so I don't know if it is just adhesive back or if there is a mechanical fastener. This strip seals the fixed/sliding door when it is closed. Thank you ... (cont.)

I'm replacing my sidelights. I need the bottom rubber seal for 1 3/4 inch sidelight bye 16" long.