Viewing all customer Discussions for:

Other

Looking for CHANNEL BALANCE for my pull up windows. Not sure what size should I buy.

See photo of a window track with all parts intact. See another photo of parts removed: a spring and a broken plastic part. Do you have replacement parts for the spring and the broken white plastic piece (clutch)? My house was built in 1979. Inside the metal window frame between the layer ... (cont.)

Marking. h 15HD I would prefer to talk on the phone. My goal is to order channels so that when my son comes to visit that he can replace them in five windows. You have options to indicate level of expertise. Perhaps you might add something like "newbie", helpless, etc. When measuring for th ... (cont.)

Need part number

The number 1298723 is cast inside the handle. I want to make this a keyed entry. Screw holes are 3 15/16" apart. I have two doors to do this too. Outside looking in, the lock/slider is on the left. I'm comfortable making the modifications to existing hardware, just don't know what cylinder to ge ... (cont.)

l need a window opening mechanism for a 2015 Thor Chateau Super C model 35SF. The 2 metal arms about 7 1/2 inches long. I saw no markings anywhere on the mechanism.

I am searching for a tilt latch for my window. The old one has broken. I ordered 2 from you recently, but unfortunately the fit wasn't correct. That's ok, I took my chance. Would you have something like the picture below? This is what I need. Probably could work if I can get something shaped like th ... (cont.)

I'm looking to replace a set of channel balances for a single hung window The metal part measures 1/2" wide, 25.75" long It has "25 5" stamped on it, along with "BSI" and "PD" See attached picture I've also included some pictures of the plastic guides The top guide has no markings The bottom ... (cont.)

I need to replace a couple of crank handles on my casement windows. The windows were made by Certainteed and installed about 15 years ago. They are almond color. The crank assembly works fine but the handle has broken and I want to be sure that the replacement handle will fit correctly onto the he ... (cont.)

Pretty sure windows were manufactured by SNE Enterprises Inc (Mosinee, WI) and they closed down years ago. I removed the jambliner and attached photos. Let me know if you have the parts and feel to call me if you have questions. Thanks.Owen

metal part 0f channel is 23 inches x 1/2 inch wide. Number painted on metal channel: 22 5 JT CMC 4

Repairing or replacement from 1950?s Truscon steel casement hardware... the cranks don?t connect with the teeth on the arm?

Hello, Looking for the latch portion/hook replacement hardware on the attached photos.

Hello, we need to replace the locking lever on several of our windows. The outer casing that has the screws is fine, there are just several windows where the actually lever has broken.

Need to replace some of my crank opener on my windows

I need a drop handle for a nightstandThe bedroom set was called BellaseraEd

Need replacement exterior handle see pictures

Hi, I have a broken double-coil balance. Theonly marking on it is a C stamped on the coil. The window sash weighs about 16 lbs. Would any of your parts match this? Thanks!

HelloI have series 795 balances 1" shoe with a hook on top! Can I switched it to the standard one with the screw instead?It's 34" (stamp: 34C BSIN 11)Looking for qty 4.

Dear sirs: I have an older sliding glass door (probably 30 years) It is vinyl covered aluminum door The rollers are not the standard wheels but use a series of rollers to move the door Had 2 sets. The back set is worn out and you have to lift the door to make it move Please let me know of any addit ... (cont.)