Viewing all customer Discussions for:

Other

Hello! My husband and I just bought our first home, it was built in '81 and we believe these are still the original windows. I found Caradco listed on the current operator handles. We have multiple windows that are missing cranks and we also have some locks with no levers or levers that have fallen ... (cont.)

Need replacement of latch lever. No exterior lock.

I need hardware to repair Silverline windows on my home. These windows ere installed 12 years ago by the builder. The springs have broken free from the pivot lock shoes (they have become brittle and have broken). The springs/balances are still intact and fine, i just need new pivot lock shoes to con ... (cont.)

the mechanism that the handle of the window sits on that turns to open the window is stripped. Is this piece replaceable?

Wanted to order new rollers for a sliding glass door. The old rollers were already put back into the sliding glass door so I don't have the measurements.

Hi, My father is installing 2 windows and somehow managed to misplace the spiral balances. I was hoping you could help me identify the right ones to use as a replacement. The fittings (on the photos) suggest a spiral balance with 4 rods at the end, similar to the ones on your website for the tilti ... (cont.)

The lock broke to this sliding door handle. It?s 23 years old. The part numbers are 77AL and 77AE.

I'm looking for the glazing beads for Sun brand casement windows, manufactured in either 1987 or 1988. As you can see it is 2-piece.

I have removed the left/right sash balances on one of my 1989 Vintage Double-Hung Andersen Windows and only find the numbers 11600 17, 111600A-3, and 927 R 477 89 and maybe (badly tarnished) 3.333.435 best guess. See pictures and let me know what would be the most appropriate Sash Balance to ... (cont.)

I have a window balance that snapped where the spring attaches to the pulley at the top. Photo one shows a good balance (has a balance show attached) from the same window along side the broken one. The metal is stamped 32 5 (photo two). I need to replace the balance. Will probably buy a few. ... (cont.)

this part is adjacent to the spring.

I have a semco screen that the frame and screen were damaged in a hailstorm . Was wondering if you know where I could get a replacement.

29 inch window channel balance with guides winged . Does it matter if the guides are winged or not. And would you identify what model should i order

Can't you help me identify this bar hinge ? The long rail is 7 5/8 plus minus. The other is 5 1/4". That's the entire length. On center it's approximately 4 5/8ths. Thank you Renzo mrscreenman

Only markings is KK

Requesting a replacement latch or thumb lever. This part is missing from my handle set. I believe, that the handle set is; imperial us, Cambridge model, brushed nickel. Please advise if you have a replacement available. Thank you!!

I need the hinge parts for me windows, both the piece on the jamb and also the one on the sash.I need hinges for the jamb and the sash2 left2 right

I would like to find out if you carry this type of coil spring for my double hung sash windows. Your help is greatly appreciated.Upper sash weight is 23.72 pounds

Coil balance broken

Have two windows where the cord broke on the left side balancers. Looking to get replacements for the windows. 26C is stamped on the bar, and the cord is attached to a small metal clip at the top of the sash. The clip screws into the sash.