Viewing all customer Discussions for:

Other

The piece I am looking to replace is the clip that goes into the metal track.

The plastic guide on other side of window broken. This is the intact picture. Not sure how to remove broken piece.

Hi! I'm trying to replace the plastic pin caps on my mid 1970s home. The only label found refers to the doors as "model C". I bought Swisco part Bifold Door Pin Cap 21-111, but it seems the pin is a bit wider than the cap and it won't slide in. The new cap's length is fine. What other cap can I use ... (cont.)

This is the only number I could find. It is on the glass: CTG Tempered 16CFR 1201 11 SGCC 1921 1/8UA ANSI Z97.1-2004

They are both 1/2" coils that (by eyeballing it) look the same. I do not know what weight to choose. The top coil has CL stamped on it and the bottom coil has B stamped on it

I'm in need of the window locks for my older Mastic brand windows. I've uploaded the pictures and can you tell me if you have these replacement parts available? Thanks again and stay safe! Tom

Spring assembly is broken. Part #170219Z13A1

I am trying to find a replacement mortise lockset that will fit my Pozzi 6068 sliding patio door (no outside key). I have looked through your catalog and it would appear that your model 82-243, 82-218, or 82-223 latch sets would replace my currently inoperative latch (broken inside spring). The mou ... (cont.)

Attached is a picture of my customers window spring and latch. I need to replace the latch portion .Any help you can give me locating something that will work would be greatly appreciated.Respectfully, Neal

There are two of these at the bottom of the window. They are attached to the lower window with a screw and fit into the slide of the window. The length is 2.5 inches long, 5/16 tall, and 3/16 thick. The hole is 3/8 from the end with the nipple

Hi I have a lot of windows that have this style of balance. I noticed that they all seemed to fail on the part that holds the window to the balance. I would be interested in anything with a similar design with stronger materials. Please let me know if there is anything else I can gather to help. ... (cont.)

Hi, these basement window handles are made of plastic and several are broken. The screw holes are 1 1/2" apart and the handle. Was 31/2 " long. As you see in the picture the lock part is inside the frame. I see no manufacture name on windows. Will you help me identify so I can order 3? Thank you, Ma ... (cont.)

Hi! Would you have these pin replacements?

Need 40 of these. Two per window

Weather striping is failing. One is the outside edge of the bottom roller rail. One is the inside vertical edge of the strike plate interior side and one is the outside vertical edge of the strike plate side

The lock has broken and I handle broke too I cannot put a key in it and the Windsor sliding door do they not have any pots so if you guys can replace it with something that's compatible would appreciate it if you could get back to us thank you

drawer guides plastic for levitz furniture

Hi As per the photos attached I need a replacement door handle for a Colen Sewell from the late 1990's.Please let me know if you have anything that will work,Best regards,Charles

Part that holds tension spring to tension line

White plastic (nylon?) rear bracket to hold metal runner for drawer slide. No markings visible. Part in removed pictures has been epoxied back together. Approximate dimensions: Mount plate with holes - 2 3/4" L x 1 1/2" H Receiver for metal slide - 1 3/4" L x 5/8" H x 9/16" D