Viewing all customer Discussions for:

Other

Brian 360-600-7062

I need to replace the bottom track for a closet. The original is damaged. I need a 60" track and can only find 48" and 72". There isn't any markings on it

the springs are 30 inches long and window weights 29 lbs?. But my shoe measures 7/8"

Sorry I could not download more photos.Here are pictures I need part numbers for hope this helps, I have more pictures of the two different lengths, sorry they would not let me download more. if you need more let me know how I can send them to you. these windows are slide up windows ... (cont.)

One of the plastic leveler mounts for a 27" leveler on my vinyl tilt window has broken. Do you have a replacement part for that plastic piece? Here's a link to the photos of the leveller and the plastic piece: https://photos.app.goo.gl/Ue6NLfPiAK2dyXJi8

black 5/16 x 1/2 from garden window, looks like the name on the window is ALENCO

Sorry, my previous email was sent before I could finish it.Can you please help me identify these balances and the proper replacements?> I cannot figure out the make & model of my sashes nor do I have a scale to weigh them. Though they appear to be aluminum double pain replacementsSashWidth: 3 ... (cont.)

Hi there - I need to buy some parts for a couple of my windows. Please see the attached picture. I believe these are balancer rail locks and latch etc.

Hi Swisco, I am looking for a replacement patio door roller for a Peachtree door See attached photos

Trying to find the correct weather stripping for 30 year old casement windows. Bulb is approximately 1/4" diameter Kerf is approximately 3/32" wide, 1/4" deep, and 3/8" kerf to bulb. Any help would definitely be appreciated.

I am looking for below stopper for the vinyl single hung window called Allied. Can we still get one? Please advise. Thank you.

Plastic carriage/aligner broken. Image is from your website per Google search, but could not find part. Thanks!

In the picture you'll see the old parts of the window the pig barn is broke with the oh shoe I Purchased a new pivot bar and shoe they're not compatible and don't work I need help finding the correct part

they say "14" on them, but when measured (metal end to end) it is really 15"--so not sure what to order...

Vinyl, non tilting windows made by A&H, which closed in 2009. Awesome. It LOOKS as if the top of spring just wedges on (pic4), bottom has doohickey which screws onto bottom of window (pic3). Theres a black plastic thing about 1/3 of way above lower window (pics 1&2). Any thoughts on what kind of sp ... (cont.)

I am attaching pictureA of the broken latch and installed latch from similar window in the house. It has following part no. 5.139.291 and another number 08. I need two left side latches for two different windows. Please advise current part number, cost and how to order. Thanks! Matt ... (cont.)

Hello, I am looking for replacement Tie Bar Guide for some casement windows I have. It has a butterfly type guide and is stamped with # 40726 on the guide. I have read through your site but don't see anything quite like the one I'm looking for. The 39-471 is one that you recommended to a lot of ... (cont.)

As the picture describes by its markings it has a 3/4" offset. Will need a pair Also has a marking of 1 3/8. Please advice. Thank you. Ken.

Hi there, I need to repair a bathroom window which lose one channel balance. I'd like to replace the whole pair. The marking on the metal is 11 2. Some small letters are "bsi" and "RM". The length is 11 1/2 inch metal to metal. The width is about 9/16-5/8 inch. The guides are shown in the photos. ... (cont.)

Trying to find an exact match for the pictures latch set. The mortice oval is 3/4" x 4-1/2" and the mounting screws are #8-32s, 3-1/2" center-to-center.The latch is activated by a lever in the door pull. Is this something you have in stock? Thank you