Viewing all customer Discussions for:

Other

Caradco window crank system

I think this is your 11/4 T lock balance cam open shoe. Dimensions are the same as shown on the picture. Want to confirm I have the correct part. Here is a picture of my part with some identification numbers. Also I do you have any directions on how to change these on the Windows? My metal bars ... (cont.)

I need a replacement for this crank, I also need one that goes the other direction. It seems like a right left sort of thing.

Can't find magnetic door seal kit for steel door. No markings on door or old weather stripping.

NOT THE SCREEN, the sliding door itself

Center Hole to center hole is about 2 5/8 apart.

I believe my casement windows are Pozzi Windows. I need 2 white operator covers and 2 white T cranks. The number of teeth on the operator is 12 and there is a notch. The number on the crank handle is 45054. Note: T cranks are going to replace the arm cranks.

The replacement part has the clip extending from the shoe, not the body of the channel as your units show. The metal length is 30 ½ " and ½ " wide. Please note the markings. "30 3" in a vertical mark and "B S!" in a horzontial mark followed by a vertical mark of " OR"Thank youDoug ... (cont.)

Hello,I am looking to replace balancing hardware on my windows as it is broken. I have few different size windows. I was only able to attach pictures for 28in length one and other one is 24inch length. Both are 1/2in channel width and end hardware is identical. Windows locking mechanism has Alenco o ... (cont.)

There was 2 of these parts that lift the glass so you can access the screen

Need 8 new window cranks

Needing a latch for two sliding screen doors.

The pivot shoe I have is wide, do you have one this width?

Need help finding these bars...and ideas

Do you se them or have something that works

the latch clips into a slot in the upper part of the sash dim are 3 1/2" x 3/4 about 1/4" thick, there is a screw hole about 2 1/8" from the rail end of the window which doesn't appear to be used in these window as no hole in sash not sure what your part number is

Find picture attached of crank assembly I am trying to replace. The assembly was made by Truth. Replacement does not need to be a Truth product

We purchased MI windows 360 series 2-Lite Slider OX (65.5" W x 71.5 H) in February 2012. The sash lock is broken and we are looking for the replacement Sash Lock (Autolock) and keeper in white. I attach a photo of this Autolock. Please let me know which parts will replace this autolock and keeper. ... (cont.)

I broke the pivot shoe for spiral balance in my window. Trying to figure out which replacement. Took photo measurements of the spiral balance & broken pivot, but still not sure. 'The window is double hung Tilt InThank you for any assistance.RgdsPatrick

What is the name of this part that accepts the screw on the handle? Where can I buy this part?