Viewing all customer Discussions for:

Other

Your offer to identify is a godsend. Thank You! 1/2"W x 30"L channel balance - 31"L if you count the plastic ends 32.6lb window Stamped on metal: 29 6 of BS1 Both channel balances were NOT engaged with the window, but were instead pushed all the way to the top. I had to pull them down and only ... (cont.)

No markings number or identifying marks

I have a number of old storm windows on rental units in need of repair, I saw no markings on the storms or parts. Would prefer metal over the nylon replacement parts

What are the dimensions of this tool? Thanks!

Hello, I am hoping you can help to identify and suggest a replacement for the casement window crank operator shown above. I believe one of the ENTRYGUARD DUAL ARM OPERATORS (#39-032) on your site will work as it looks very similar but was hoping someone could confirm before I placed an order. The ... (cont.)

Window is Anlin double hung but only the bottom coil broke. Coil is marked "9 KE"

I have a Viking Arch Window circa 1997 that has a plastic glazing along the bottom with a flexible Vinyl Glazing around the arch. The plastic part needs to replaced. Please note that the piece in question is not in the proper position. It is suppose to be beveled.It measures 57.5" X 1.5" X 5/16". No ... (cont.)

I'm looking to replace the outside handle on my Pella sliding glass door. I would take a generic part if I could determine whether there is a generic option.

Stamp reads 29-2 bsi. Channel measures 1/2", metal measures 30", bottom winged shoe measures 1". Window measures 23 1/2"x 32 1/2". Pictures included are for this window only. Resembles your part S380? 2nd Window measures 32 1/2" x 50 1/2; stamped 2990-38 bsi... I don't have channel balances out for ... (cont.)

Hi, i have acan 550 series windows and am looking for these pivot bars. they are 3 inches long

i am looking for replacement hinges (right opening) for Weathershield casement windows installed in 1995. The plastic covering on the guide tabs have deteriorated and broken. see photos. The length of the hinges are 7.5" x 5.25" in length (with no markings). Can you help find replacements or altern ... (cont.)

These are the photos of the top and bottom of a window latch I'm trying to replace. I will need on for left and right mounting. Do you know what the part number is?

Looking for a match or something that will work in this application

Need to have 2 handle

Need white [preferably) sliding door latch / lock set for replacement . Mounting holes are about 3 and 7/8 in. apart. Latch hole is about 2 and 7/8 in. from mountin holes. Previous lock had 2 locking prongs and had keyed lock on the outside. Door frame is 1.5 inches thick, do not know the manufactur ... (cont.)

General American window rollers

hello i need to replace my mirror doors roller. can i purchase them from you? i need to know which ones i need thanks this is on the back on the hardware stanley 00-5024

I have no photos of bead removed. relevant measurements are: Inside glass (to edge of frame): top panel: 33 1/4 w x 27 h bottom panel: 32 w x 27 h inside frame to frame - 34 1/4 wide outside glazing strips" top panel: 28 h x 34 1/4 w bottom panel: 27 1/2 h x 33 w visible lip on glaring strip: ... (cont.)

do you carry these in dark bronze?

One arm has 30818 stamped on it See pic I need a complete set including the hardware that is attached to the top and bottom of the window edge