Viewing all customer Discussions for:

Other

Only different between these 2 parts is the bottom and it's a 3/32 different. I think my part is the 385 series. If I'm not sure, should I error on the smaller size and choose the 380 or error on the larger size and choose 385 ? Lastly, the 16 inch balance, what is the normal weight support ? I ... (cont.)

The metal tube measures 29 inches. I figured the 28 4 as marked on the tube meant 28 inches but the metal tube is 29"

I need several of these latches. I can't figure which ones they are. There is a patent number on the latch that is 5439291

Need to replace an Narrowline 200 Andersen window balancer part is stamped 927 BR52 4 92 what part will work as a replacement?

Looking to find a replacement for a window crank that goes on the right hand side of the window. The identifying numbers on the crank that was removed are EntryguardL30841 and 20810I have attached pictures of the part removed from the customer's window

Need to replace Pacesetter window latch/lock. Need help identifying the correct part.

I am looking for the plastic parts that the drawer glides over so the wooden drawer is not rubbing against the wooden frame. They are the dark brown circular plastic pieces shown in the pictures. In the first picture, you can see them both in the second drawer opening. They are completely missing ... (cont.)

I believe have American Craftsman Windows. I have many broken flared pivot bars. The part appears to be marked with "1074".

Looking for replacement holder. Goes in back not sure of correct term for the part.

11600-17 B96 4/19 885

Truth Entryguard Dual Arm Operator - Part 2077 is appx 3.75" with an offset down.

Nylon bracket that fits in both sides of track.The bracket holds the side window bracket at bottom of window side,and both the balance rod and the red balance pivot shoe. The bracket is approximately 2 1/2 inches high.

Its is 5/8 thick and 1 inch 3/8 wide

I'm not sure of the item number for this, or even what this part is called. Two of these rollers sit on the top edge of my sliding glass door. I'm interested in ordering replacement parts

Patent number 3996643 Would like to replace rollers on two sliding glass doors.

this L-shaped piece attaches to the bottom of our tilt-out window. The casting broke at one of the screw holes.

The window is about 25-30 years old. The crank will no pull in the window. I read the patent number as US Pat. 4505601

I have original windows from the 70`s and the balance shoe is broken. This one is intact and it attaches to a spring. The sash is vinyl.

plastic part

I had these vinyl replacemen window put in over 15 yearsago and need replacement channel balances for a few of them. Can you help me wih this??