Viewing all customer Discussions for:

Other

Roughly 3/4 of an inch from top to bottom and circle is 1/8 inch across

Hello, windows are single hungs from 1999.

Hello,Your Kenlin hardware can be replaced by our 32-081 drawer socket and 32-076 case runner. Take a look and let us know if you need anything else. Thank you!

Window 1: small Length of balance (excluding plastic) 28" Stamp is 2720 % Need a set of replacements Window 2 & 3: medium Length of balance (excluding plastic) 28" Stamps read 2740 % Need 2 sets of replacements, one set for each window. All three windows are Alenco brand.

Need a couple dozen

Hello,It looks like you need replacement face guides. Take a look at a previous customer discussion here where our experts recommend our 67-014. Take a look and see how our dimensions compare to yours. Thank you!

Hello,We've seen pivot bars like your a few times in the past. You can view our recommendations to a previous customer here. Our best replacement options would be either our 26-030 or 26-226 pivot bar. Some customers have had no issues while others have had to make modifications to get one of these ... (cont.)

My top window keeps sliding down ( just about 1/2 inch) every time I unlock it to open the bottom window. How can this be fixed?

Just placed order Checking correct part

I am looking for replacement parts for 2 Window Channel Balances. 1/2" channel width 28" long Stamped with below info 2730 BSI CL 1/2" channel width 16" long Stamped with below info 1520 BSI JL

This is original 1982 kitchen cabinets Drawers are sliding across these plastic 'bearings/slides' Some are broken, and the drawers don't open smoothly so looking to do a simple fix for now.

Looking for a replacement for the attached Truth operator in LOW PROFILE - not the exact same operator as shown. Thanks!

Hi. Looking for some guidance on a replacement handle like the one posted. Thank you in advance

Looking for the name of this part from a Jordan window and what other part might be needed along the one pictured to make the repairs. Numbers on the part are 2830

pivot shoe for thermal gard widow need more than one

Are you able to match this part from photo, or will need me to submit measurements? Thanks, David

This glazing bead is for a 3/8" OA Insulated Glass Unit Frame. Can you help me out.

the balance or balances I am looking to replace are 30" long (metal u channel) and the markings are 29 1 bsi mc. Can you help?John

I need a replacement for a Caldwell Channel Balance with the following information 18" Long Stamp - Caldwell 17-4 1/2" wide 9/16" deep I believe I need the S 385 with option 1740 but I wanted to be certain before ordering. Thank you in advance.

Hi, I need to replace two Channel Balance's, I'm not sure if I need the S351 or a different type. Numbers on the rail 27 4 CW CMC 9 length - 28" Width - 1/2" Also its not allowing mt to upload photos, its timing out. If you email me I can forward the pics to your email. Thank you Shar ... (cont.)