Viewing all customer Discussions for:

Other

My window is Milguard brand. The lower part of the window (the part that moves) is 29 3/4 inches high and 33 1/2 inches wide. My balancers are 27 inches long (measuring metal channel only) and have '26 4 AK CALDWELL' printed on them.

Double hung window with this vertical track in the sliding portion of the window.

Need 2 (left and right) of this part - measures 30" from outermost point on plastic pieces end to end. There is a number stamped on it: 2820B (the B is backwards when reading the number correctly). Last repair needed before closing on a home. Thank you

Replacement or parts door is a "C" model 88 X 24

Hello,I'm afraid this type oh locking handle is no longer available. Take a look at the 38-139 as a possible replacement. I cannot guarantee it will work but it is the only other match we have. I am sorry we cannot offer an exact replacement. Please let us know if you have any other questions. ... (cont.)

Hi Mike,I believe you are correct that the 81-081 roller is the correct replacement for yours but with a steel wheel instead of nylon. This roller with a steel wheel will still work for you as long as all fo the dimensions line up but if you prefer to use a nylon wheel, you could replace the wheel i ... (cont.)

Number on the hardware (attached to window frame: 40942 (sitting flat on the frame) Photo 1: Shows the configuration of a crank assembly that is in good condition. Photo 2: Shows the severe corrosion / degradation of the hinge "arms"... about ready to fail. I've tried to look up what Shuco was ... (cont.)

I have 8'tall glass doors and the outside part of the set(without the latch)is not exposed. I can't seem to get it out. The outside looks just like the outside part of the 82-002. Is there some way to remove it from the inside of the door frame?

I'm looking for a replacement drawer slide. The only markings on the part that I have are LC and 12-03. I've attached pictures of the slide and the mounting brackets. Any help is appreciated. Thanks.

Hi Tom,I believe your pivot shoe has been discontinued, but either of the pivot shoes you choose could work. You will need to make sure the thickness is accurate so that it will fit in the channel. If you choose one that is too thick, you won't be able to install it. As for the top attachment that h ... (cont.)

I am looking for the dresser drawer handles for my 1970's Thomasville dresser. They are approximately 5 and 13/16 of an inch in length and there is a number molded into it which is "A8987D"- I don't think it will show up in the picture. Do you sell these type of replacement handles? Thank you an ... (cont.)

Door says Sunshine Mirrors. Plastic on pin piece broke, replacement parts found in store are too small of a diameter(shown for comparison in 3rd pic.

We purchased this at NFM in 2005. Do you have parts to fix these drawers? Thanks,Dana

4 7/8" X 1" Bronze

I noticed the window metal spring wasn't working on one side when I looked closer I saw this plastic round piece was broken and the metal cam was stuck in the window. Can you help me order some new parts please.

2" long providing a space of about 1 1/4" Hard plastic, fails over time under heavy load of canned goods

what tool is needed to install this pop rivit to operator and link arm?

Hello I just had a question regarding what part I need, I am unsure of what option to to pick based off of what we removed. I attached 3 photos of the part we removed. On the part it says 30 4 B.S.I 0L. The metal part we removed is 31'. Just wondering if you can help me understand the option numbers ... (cont.)

Not sure what you call those, but I need to replace. Pictures give you an idea what I'm looking at. Can't figure out how to remove from trac. Any ideas?

Spring on one side of window seems to have broken and coiled up on top of the piece where sash clips into. Does not have a brand sticker on window and was installed about 6 years ago.