Viewing all customer Discussions for:

Other

I hope to replace 6 plastic drawer pieces that have cracked. The pieces are located at the bottom back of my drawers and keep the drawer from going off the track. They measure approximately 2 7/8" x 1 7/8" and have 3 holes in them for screws. Please help me identify this part. Thank-you. ... (cont.)

Hello,I'm afraid I can't identify exactly what you have from this photo. It's tough to make out the lock while it's still installed. Would it be possible to see it removed? In the meantime, see our 38-205 or maybe even our 38-208 and see if either of these could be what you're looking for. Thank you ... (cont.)

I have Anderson double hung windows, dating back to 1970 (I believe). Need to replace the sash balance. Having trouble identifying the part on-line. The numbers on the existing part are: C5 5 23 770 (the 5 23 is written larger than other numbers). The upper vinyl sash also broke taking it out t ... (cont.)

Hello,Assuming you're working on an awning window, there are quite a few things that could prevent the window from closing. I'd recommend starting by checking for debris that may be clogging the track or operator linkage. If those areas are clear, check to see if any of the hardware is damaged or co ... (cont.)

Hello,An Andersen sash balance with a stamp of (5 31) can be replaced using our 24-531. Take a look and let us know if you have any other questions. Thank you!

The windows are aluminum... the tilt latch is cracked. It will no longer hold the window in place. The dimensions I need are 27/8 in. wide and 3/4 in. deep. Openings for screws are 2 in apart.

This piece has broken. Can you identify?

I need snap-in vinyl / plastic exterior glazing bead in bronze color, for PGT double-hung windows (circa 2007) to replace the original glazing bead that has curled and pulled away in a number of places. I've uploaded photos. Please note that the ruler used in one of the pictures for scale is in me ... (cont.)

Not sure we can fix this so do you have a replacement?

Looking for a piece of rubber to replace this piece at the bottom of the shower door.

I need to replace some coils on my Simonton Single hung windows but I can't read the stamp on the coil. the windows are approx size of 34" x 60" and 34" x 64". One window has a label Series: 40-06 and P.L.# 063-014. The coil is 3/8" wide. They also appear to be dual coils. On some windows I may al ... (cont.)

Dimensions are 2 5/8" L 5/8" W We just sold our house, so we're looking to replace the clips.

The door is probably about 26 yrs old

Hi, I need a door handle for a cole sewell storm door. Pics are attached. Can you recommend something that would fit this? Thank you Justin

Hardware keeps failing, and bending, from mirror closet door

I am retired from the window industry and thought I "knew it all." However, We have just purchased a home built in about 1993-1994 that has Caradco casement and awning windows. The operator crank has a metal cover (verses the plastic pop off type) and I can't figure out how to remove it. Could yo ... (cont.)

Do you have a replacement piece for Mastic Windows.

Do I order the pile height as measured? The striping has to be 20 plus years old. Looks like it's 9/32 x 5/32. I wasn't sure if the pile has worn down along with the fin seal ? Please inform Thanks Mike

I Need replacement drawer slide socket Where can I get this part?

I am replacing broken rear brackets as well as slides on a 1993 island in our kitchen that has 2 top drawers and 4 slide out shelves for pots and pans. The pictures are of the right rear drawer bracket and left installed rear drawer bracket.