Viewing all customer Discussions for:

Other

I'm looking for a set of these rollers and I'm not having much luck.

I need your help to identify a suitable replacement for this window glazing. 3) Pieces needed, each 36" long The glazing is a semi-hard vinyl or plastic. Tan or Bronze color. The window was manufactured by General Aluminum. The glazing is decorative or a finishing glazing There are no part or iden ... (cont.)

Good morning! Hoping you can identify what is needed to repair my window. The 2nd picture is the cover over the springs. The springs are stamped "#5.0 35" 5232208, #4.0 35" 5232208, #5.0 35" 5232208". Any help would be much appreciated! Thanks!

I incorrectly ordered wrong part on order 1360636. Not really trying to get credit. Missed this option first time around. Just need right parts. Can you suggest please?

1.5". Wheel Tab. is 5/16" wide

When I placed my order (Order: 1358408) for 23-215 I thought I had the correct piece, turns out I didn't. Nonetheless, attached are two pictures from a working door. I need two or a pair of these. Thank you, Paul

The pieces on the top are from one window. The metal bar on the bottom is from a different window. The smaller part on the top has a pat. no. 5.704..165. They are from windows that were install in 2003/4.

I need the entire unit top and bottom both sides for 2 windows please

Hello - We have a 24 year old home with Simonton, Dimension I Windows. We have a number of broken coil balances and tilt latches that I need to replace. I'm sending pictures of the Coil Balances (originally located high in the window frame) as well as a replacement set that was done under warranty ( ... (cont.)

See above

Im inquiring anout this part do you have jt an how much does it cost this is the number on the part .... PAT.5.353.548 Thanks in advance Tricia

I need to replace a sliding glass door handle. The tag reads: CODE: HII-280-3 SPEC: NFRC SERIES: SVPD MST: 280-M-017

Indoor/outdoor lock without key or handle MOC was the marking of the product

I am trying to find the tilt latches to replace in the windows of my house. The original manufacturer was Super Seal out of South Plainfield, NJ

Tip of tab broke off.(see circled pic) Can I just order tab,or need to order whole cylinder assy.

I have a 37" single hung balance. There is a stamp (3640 BS.I. RC) at the base. After searching your website I believe this to be the S395 model (based on the top and bottom photos). The shoe however measures closer to an inch i think similar to part #15-002. Could this just be due to wear and tear? ... (cont.)

Hello, I'm trying to find a replacement for this broken latch.Wondering if you have something that will work?Thanks for your time,Mike

I need two replacement for a small bathroom window.

Which door handle is this one want to replace whole handle both sides?

Need split arm operator with pin stud and stud holder