Viewing all customer Discussions for:

Other

sliding window latch for Vinyltech windows. measures 2 1/16" on center from screw holes. 1 3/8 x 3 1/4" outer dimensions. will need three sets of left/right.

Hello, I have Pennco windows (now about 18 years old) where the metal cam inside the sliding lock shoe/sled has broken (the ones pictured here are not broken). The weighted cord is attached to the shoes with metal hook. These appear to be about 1-1/4" wide X 1-1/4" high X 17/32 or 9/16 deep (it's ... (cont.)

Our house was built about 2007.(Athens, Georgia)No identifying marks on who manufactured the window.Attaching some pictures.Looking to replace the seals on lower window sash.There is a groove the seal fits into.Thanks Noah

Series 710SH AAMA/NWWDA 101/I.S. 2-97 H-R40-48x84The spring broke.

Hi: my windows weight is 22 lbs Balance width is 1/2" length balance (metal) 29" Can you said me which one is good for me Thanks, Carlos

Looking on your site I see two possible item that looks right. s351 or s390. Where do I measure to determine which balance I need.

These cabinets are approximately 30 years old. There is no brand name to be found. This is a side mount guide. The guide has a slight bend down at the rear of the guide. I was wondering if your part #32-119 would work as a replacement. Thanks

I need the track wheels shown below for a Stanley Monarch mirror sliding closet door. I need eight (8) track wheels.

NEED A NEW KEEPER #30621

These windows may be originals from when the house was built in 1965. Certainly they were here when we moved in in 1999.Is there a pegs for keeping them in the tracks can be found somewhere?Bob

Hi, My name is Steve and I am looking to identify the equivalent replacement balance for the one shown in the picture. The window that this came out of is a 16 year old PGT single hung non-tilting. Thank you,

I am repairing vinyl windows installed in mid-90's. Pivot pins are broken on some and are now obsolete. Do you have a recommendation for replacement?

I am doing a leak repair and the bead needs to be replaced due to damage done to the snap leg being cut off. I am needing 4 pieces 12' long.

I need crank hardware and a few of these parts that keep window in track

Hi, I have a True window and although the lock works the handle that locks/unlocks the window is stripped. The part # 45082. Can you tell me where is can replace this piece?

Do you carry this part. Double hook lock mechanism?

Looking for replacement roller assy. for 36"x36" bathroom window. no identifying markings. Home constructed in 1992. the roller is brass approx. .375 dia. thanks, Doug

Looking to repair/replace parts for drawer. Have 10 drawers. Degree of difficulty to replace ? Noticed original is stapled, is that the only option to secure ?

Trying to find this part.The channel balance on the window S385-20

I am looking for replacements for these screen retainer clips. They are for Republic windows on a house built in 2000.