Viewing all customer Discussions for:

Other

I need a pair of these drawer slides

I am having a hard time determining what Series Type of balance I have. They are 1/2" wide and 27" long. From other threads I believe I should have the 2650 option. Thanks for the help!I also have an issue with the part that the balance slides and connects to. It is the plastic piece that is screwed ... (cont.)

I don't have any part numbers. Inside where it attaches to the door has cracked where the screws are located.

I need a few operating levers for this type of window. They mount to the window with 2 small screws.

- balance length 28" ( metal portion ) - end to end 29" including plastic end pieces - lower plastic piece is 7/8" wide. - stamped number is 27 4. BSI - lower portion of window (Height 29")

These were installed in 1990 and keep breaking randomly. I would like to replace them with the same part, but don't see the part on your website. Are these ones still made? Or is there another part I can get that will work?

Need Sash Control patio door lock assy (lock only). Inside handle reads 1060-1943.Ourside handle 20-67??Mortise lock assy dropped down into door frame when I disassembled. Can you identify the lock unit?

I would like to order 2 of these devices in that attached photos. The length of the metal is 28" long. Please send me the correct part number.

In the same window I had two different numbers on the broken balances. 2250 and 2230. Plastic hardware is mostly broken and I'd like to find a replacement catch if you have those as well.

Please let me know if you have the attached bars. Thanks

Installed a thermostar pella door is there a bumper for the sliding side Door handle hits frame what bumper fo i need Thank you

# on balance is 32 End of balance is indented not u shaped

Your replacement part shows the rollers side by side and not staggered as the picture indicates; will your product #23-222C still work ?

Need three hinges for storm door

This is the vertical seal between the 2 doors. I cant seem to find any info on whom the door is made by.

Cabinets installed by Ansco, who sent me to Grass America who suggested you. Can you help? Thanks

64y-000 is the only number I see on the door. I need this part.

Hi We have Kinro balance stamped 26 3 in a bedroom window. Home is 2001. My wife and I are arthritic , but want to make sure the window stays open. I believe the S385 27 matches ours, but don't know what spring tension to order. We have other Kinro windows that are hard to open and close.do yo ... (cont.)

the window clips appear to be broken, the window opens than slides shut

Need a replacement for my double hung window. 21 inches from the bottom to the top of the plastic. With 19 5 JO CALDWELL on the part not exactly sure do I get a 19 on the part or 21 by measuring bottom to top?