Viewing all customer Discussions for:

Other

See photos. I have no idea what this is called. Thanks

Hi the balance that I'm trying to match matches up to the s385 but with the option I don't know which one the markings on it say 29 5 GR CALDWELL Thank you

I need four of these for PGT single hung windows that the glass actually measures 32" wide and 34 1/2" high. Obviously the frame is slightly larger (34x37). The house was built around 2001. Thank you

Manufacturer of window is unknown. Balance is marked with: 13 4 ET CMC 2 Thanks! Brian

Hello, can you please help me identify the attached weatherstripping for the bottom of my windows? Can you please recommend a replacement? Thank you so much.

I need an interior handle and rollers for a Crown 5820 Sliding glass door. I contacted IWC and they gave me the part numbers sp5910whp for the handle and sp3557 for the rollers. Can you help me with this?

The handle from our locking patio door has broke/come off and it will not be functional again because the holes in which the screws are in are wore through larger than the screws. I am assuming I need a whole new door lock mechanism and handle, correct? And if so, due to the storms on the east coast ... (cont.)

I have the same kind of wooden slide on a piece of furniture and I am looking for the metal channel / slide piece that is attached to the center bottom of the drawer. Any idea of where I could find this, it is 14 1/2 inches long. Thanks

I need 231

I need to replace the bottom guide and sliding hareware on my wooden doors.

Can you tell me if you have this part ?

I measured the length and width of the balance, 33" L x 1/4" width. I don't have any other information regarding this part.

This is a State Govt Complex and we have leased out our front offices for the last 21 yrs and are now retaining use of them, again. BUT

This is a sash balance from a BFS (Builder's First Source) single hung non-tilt in window. From the inside of the house, this is the left side balance. It is 28" long, and 1/2" in width. It came out in pieces. Builders First Source will not sell me a balance, as they only deal in warranty, which ... (cont.)

I need 5-29x2 And 1-20x2

Frame width 1". Can you help ? thanks by advance, & happy new year

I have a 3/8 Spiral balance with a red tip. It measure 28.5" long. I cant find them, can I get 28 or 29"

le-al-co 2" Lift Window 2" To Tilt LE-AL-CO

It

I am sending a picture of the part needed for Certain Teed window tilt latch to you in a separate e-mail as the owner has the picture. These pieces are from Certain Teed windows and have no information on them. A company called MI told me to email Swisco. I believe these are tilt latches but was jus ... (cont.)