Viewing all customer Discussions for:

Other

Need help identifying Sash guide. There is a left and right guide opposite hand. The channel where the mounting screw is located is just over 5/8" wide. The overall height of the remaining part is just over 5/8"

Please see attached the picture of the part I'm looking for. Looking forward to hearing from you soon.

Hello,The plastic triangular piece that holds the window in the track broke off. I need replacement hardware for both the left and right sides of the window. I measured the piece is 5/8" x 3 7/8". Please let me know if you have this part and I will order.thank you,Donna D.

I need two tracks of model 64564-001 of 5 feet and the wheels . Please sent me the info of what to get. Thanks

I need the replacement spring for 1 window and the replacement parts that attaches to the bottom of the spring. These are Jeld Wen vinyl double hung windows.

My windows are very hard to open. I managed to get the window out. I would like to know if you have an assembled channel balance's for replacement. These are side by side windows so I require (4).Thank YouJohn

We bought a 53 year old Eichler home in California a few months ago. All the glass in the sliding doors has been replaced and they work pretty well. The problem is the hardware on the door doesn't work great and we'd like to have it replaced. I went to Belmont Lumber and they told me I need to fi ... (cont.)

Hi there, we're having some trouble tracking down these parts. We need the spring loaded pivot bar and balance spring for these windows. We believe they're Jeldwen, but no markings to confirm. Per the owner they were replaced in ~2009. We need the pivot bar which is ~2" long. The balance springs are ... (cont.)

Hopefully you can identify this!

Here is one of the two roller brackets that originally supported the pocket door I am repairing. I have it arranged on a strip of paper that represents the 1-3/8" thick door I need to rehang. I have it positioned so that the wheel lines up roughly with one of the two v-tracks that it has to sit in w ... (cont.)

Looking for a Anderson balancer for a Anderson 200 series 20 x 30 window. The number stamped on the balancer is D80 7127. According to the Anderson Window chart I need a 837 but a previous post on this site says a 727 so I'm confused. Thanks for your help.

Do we need to replace both parts.. the latch doesn't work..under the latch mechanism.. it says Int. Lock thumb latch

Tilt window slice up

I just want to laud you for the perfect type of product video. Succinct, quick and informative. So much better than those made by presenters claiming their 5 minutes of internet fame. As a handyman, I often have to wade through repair videos that should only be a couple of minutes long. Thank yo ... (cont.)

Hi. Looking to replace these as they are cracking. Color is biege. Appearance when snapped in is squarish. The dimensions are: Top side: 6/16" Longest side: 9/16" - has a slight indention but it does not show in the photo Side showing indention in photo: 7/16" If I can find some just like this ... (cont.)

I previously purchased the Item # 26-438 Pivot Bar, 2-15/16". Those worked fine for my window, but it appears the balance shoe also needs replaced. Not sure which part I need to order. See attached photo.

Please let me know if you can supply the part for my Pella storm door serial number 05206 90562 0534Thank youTerry

Is 90-009 the correct replacement for the part in the attached picture.

The only mark I see is "14". It measures .75x.50" it is about .50 in height. This part screws on to the beginning of the drawer guide.

Odyssey Group the supplier of these handles apparently went out of business quite some time ago. I was able to find reference to the original part including the supplier part number(s) OP57452 and OP57390/91. None of the RV manufacturers I've contacted have any available and no one has any informati ... (cont.)