Viewing all customer Discussions for:

Other

1 1/2 x 2 1/2 was looking into the 15-188 would like to know which shoe could work as a replacement

12 2 IW CMC 7

H-LC40-44x7 Series0601 Dbl Hung PL004-DO5 or DOS need both bottom sash sockets and arm with ball for socket.Also wondering if the side tabs to hold sash on bottm sash are replaceable.Those are also defective.Thank you.

looking for top & bottom track & hdwr. for Acme champagne gold mirror bifold doors. also I believe Cox may have also made the same . any help out there?

Need to replace glass shower door alignment spacers. Little plastic spacer which keeps glass shower door aligned and able to close. Over time the scrwe hole has stretched and gives too much too keep glass door alighned level for closing

Roller assembly replacement

I require both the left and right tilt latches.

I believe the spring tension is a cable/string

Hello Swisco, I have a broken lock lever on an Atrium White window lock that I need to replace. I have attached 3 pictures. Please let me know if this is something you might have. If more measurements or a picture of one that is not broken is needed please let me know. Thanks Keith ... (cont.)

NEED THE WHOLE ASSEMBLY. 30" SPRING. SHOE IS 1/2" WIDE AND 2 1/2 HIGH.

I am looking to replace 4 of these guides, please see pictures. Thank you Scott

Doesn't appear to be the same as 18-174. This is being used in 385-28 Channels

Retailer for this part near 92707

I HAVE SOME OLDER SINGLE PANE WINDOWS; PROBABLY MANUFACTURED IN THE LATE'60's OR EARLY '70's THAT I NEED PARTS FOR; & THE ONLY NAME I CAN FIND ON THEM; IS ON ONE OF THE CENTER LATCHES; & IT SAYS TREND! IS THE THE MAUNFACTURE NA,E; & CAN I FIND PARTS FOR THEM?---THANKS! JC.

n this window on lower sash has a angle piece on sill for lower sash to sit on

What pin will work?

Looking for balance for Simonton windows made in 1997

28B USB block and tackle balance 16A usb block and tackle balance

Good Day; I have a UB28C channel balance. The guides measure 1", and metal portion measures 29". I believe the manufacturer was Florida Extrusions. Do your require any additional information to identify the item I should order? Thank you for your assistance

i cant read the tag but i think it says full vu folding doors high or digh building products coopersville michigan i only need one of the nylon caps or the entire rod i rebuilt these and the parts are in good condition