Viewing all customer Discussions for:

Other

my old balancer has part # 11600-2 and E47 9 27 11 82. what replacement model # do you recommend?

Looking for balance bar 3340 BSI UL

The rollers are 15/16" (23 mm) in diameter. The glass is 5/16" (8 mm) thick. The center of the mounting hole is 3/4" (19 mm) from the edge of the glass. The hole in the glass is 5/16" (8 mm) in diameter. These parts are apparently imports from Europe, but they don't ship to US.

Double hung from the 80s. Lower window is 35 15/16" High X 32 7/16" wide and upper window is 23 15/16" high X 32 7/16" wide. Can you help? Need two left balances and a right. Thanks! Matt

there are several models very similar I'm not sure which one is I hope your help thanks, it's the piece that go to the sides of the window

I HAVE THE PART NUMB.AND THE NAME OF THE COMPANY . I SAW ONE SIMILAR TO IT ON YOUR SITE BUT WANTED TO MAKE SURE IT WAS THE RIGHT ONE.ITEAM NUMB.7905391..PINE VALLEY WAS THE COMP. THANK YOU

Hi, I would like to make sure that I order the correct window balancers. It is for a Milgard Window the balancer has the following identification 26 4 HU CMC 5. Thank you for the helo.

The shoe is 17/32" (.530) thick, .963" wide and 2" tall. There is a marking PAV#5-377384

28" long, for single hung window. Window is 34"w x 29.5" h

CW CWC 9 30 in

The first two photos are of numbers on the actual window and the third is the party that I need replaced. Window does not stay open.

I am in need of a "Balancer assembly" for a Simonton single hung window. I am including pictures of the id tags on the window frame. What parts do I need? Thanks.

I have two Channel balances, both are for a non tilting aluminum window and are 9/16 wide and 28 inches long. One is marked 27 c and one is marked 2/30. They came out of the same window so I am guessing at some point somebody changed one of the balances. Can you tell me what series of balance to ord ... (cont.)

Need help identifying what part to order for Andersen window balance replacement.

Do you have this part? This part has broken on our tilt windows. I included a picture of the balance.

I need 2 of each of these balance springs for vinyl Viking windows. The measurements: Shorter one = 18 1/32" (marking on the back = 1620 BSI/BL) Longer one = 30 1/32" (marking on the back = 2830 BSI/BL) I have ordered from you before. Tom

I need to replace the window balances on some windows from a house I just bought. they have the stamp on the side of UNIQUE 25-f-60. none of the research I can find has those style of markings. thanks

I am looking for the part the window screen pin pops into on the side of the window jam. it is an oval shape white plastic piece 3/4 inch long by 1/2 deep. Roger

Hi, Have a couple of broken balances for top section of my windows Part 08/2 unique 28-C-30 Any chance would have a replacement one. Thanks Done

The number is 3420 I'm confused with the different series I need 24 pcs Thank u