Viewing all customer Discussions for:

Other

PAT. #5,139,291. other markings 9E and 375 It is 2.5 inches long.

I am attempting to find to window part pictured below, it is mounted inte sash on each side of the window and balances the window as it is opened or closed. There is a number etched in the part as 2320 PR BS1. I appreciate any assistance you can provide in locating a suitable replacement. Thank ... (cont.)

Hello I would like to know if you have an equivalent snap in window glazing. I'm looking for a replacement part.

please see attached photos of slide release latches i need to replace on aluminum replacement windows. from the top it is 2-3/8" long and 3/4" wide. thank you for your time.

Looking to locate around 40 of these. Brett

I forgot to tell you the length. It is 2 and 7/8 from the little tip to the other end. is also 1/2 inch wide. Thanks

I need a channel window balance (non tilt) to replace one marked 20 5 GT CMC 2. Which one should I purchase?

Need help with this bracket, can't seem to find the correct one at any of the hardware stores. it looks like a simple bracket. The house was built in 1956 if this helps. I also added some pics of the back of the closet door in case that helps with the door manufacturer. There is a plastic peg that i ... (cont.)

need to replace 10R would appreciate your help to identify which part thanks

26-7 BA5 CMC 4

I need a tubular spiral balances with the following dimensions: 1. Red 2.3/8 3. 28 inches long Came out of International window aluminum frame approximately 3'w x 5'h could also use pivot shoe and window latch tilt set and for the same. There were no names numbers or markings on ex ... (cont.)

High winds ripped out my screen and the plastic corners are now shattered.

Hello, I've got a glass sliding patio door that is 1 1/8" thick with a clamp lock and I want to change it out to a keyed setup with handle so that I can lock/unlock it from the outside of the home. What product(s) would you recommend for me?

pgt #913 torque bearing

I have this chest of drawers and the drawer stop is broken. The dresser nbr is 900-116. Can you help me locate the part.

I have a Thomasville bedroom suite number 22411-310 code number 9209. The dresser has missing pulls. Can you help me find pulls?

I was unable to send picture. The slot is 1 5/16 x 1/8

I have oox 21-717/21-767 rollers need to be replaced Plz tell me right sku# to order so I can order 4 of them. Thanks.

Looking for these top sash guides. Believe it is a capitol window.

I have old metal windows and the white (now yellowed) plastic latch is broken. By broken I mean that the piece that connects to the window and keeps the window from falling forward is broken off at the end.