Viewing all customer Discussions for:

Other

Hi, I am not sure which part I should be ordering for my old kitchen drawer. The plastic guider piece broke. I am thinking it might be part 32-031 or 32-032, maybe 32-123 might work? Any advice would be greatly appreciate it. Thank you!

I need 4 shower door wheel brackets, where is the best place to buy these?

Mmm

This piece of the window just popped out. Could you tell me what I need to fix it and what new parts I may need. Thank you for your help

Which snap in glaze bead is this? Pictures attached, apologies for the broken glaze but it's all we had to go off of. Mike

We are looking for sash "releasers" on Certain Teed replacement windows. It looks like the tilt window latch on your web page but it only has the 2 holes (that look like eyes) but does not have the center hole ( that looks like a mouth). Only way I can describe it!

channel balance is 3/8 diameter and 28 inches long. I do not see this size describe in your online catalog.

All they say is Vetter and they are grayish

I have Anderson window balances that are around 1975 vintage. The stamped number is E46 9#27 7-77 I need a recommended replacement number.

Could you help me find a replacement for this drawer slide? It's marked "Sequar", measures 15-3/4" long, 7/8" in the narrow part towards the rear, and 1-3/8" towards the front. Thank you, Mark

I was wondering if anyone has these types of drawer part or something that would work?

I am in need of discontinued Mepla hinges for a lazy susan (the hinges for hanging the door onto the cabinet) I understand they are no longer being made. I have attached a picture. It sounds like you may have a replacement type hinge that would do the trick. Please advise Thanks Patty ... (cont.)

I have an Anderson Window Balance with the number E46 9#27 7-77 and need to know the equal part number.

These are plastic clips that hold the plinths in place. They deteriorate from direct sun and I need to replace them often. Please advise if you carry them and the cost.Bill

I have not foto of the actual slide. The Milgard window measures: 30 1/2"wide by 32 1/2" long. This includes the frames and hardware The handyman says it measures 30x 32 . A foto of a similar window sticker in a different size says: Series 6210/6230J/6270 H-LC30 and H-R20 the sliders seem b ... (cont.)

Hi. Just moved in and foot security lock on my sliding patio door is not functioning. I can not seem to find a replacement. The label on the door reads MFR: SIL-1. SERIES: 5500-5700. TYPE: SLIDING GLASS DOOR. In the past I have experience with Andersen and their foot lock, which is awesome but I d ... (cont.)

Need help removing sceen door. Can

Please refer to your part, No. 58-134. The bottom portion of this part, that is the base can only measure 1/4 inch. From the base, it proceeds with a perpendicular connection from the center leading to a bulb or bubble, the diameter of which would measure between 1/4 and 3/8 an inch. The bulb or ... (cont.)

Hello, Thank you for your time in taking my question. I am wondering if the crank handle is removable or pinned in? Two reasons; 1: If the crank can be removed each time and hung on hook as to not stick out all the time. 2: as mentioned in title. If the crank is removable each time, than a simpl ... (cont.)

please help confirm the channel balance replacement I need is the 30" series 385 channel balance S385_30 option 2970. attached are photos of my channel balance. it is 30" long supporting a 41 lbs window (29D marking) with 1 1/8" deep shoe. please also confirm the S385_30 option 2970 is fully asse ... (cont.)