Viewing all customer Discussions for:

Other

I am looking for this window lock in brushed or satin nickel.

The door handle is broken and needs to be replaced. The handle is 6 and 7/8ths inches in length and 2 and 3/8ths inches in width. It is silver in color but any color that is available will do.

Hi - I'm looking for: 2 hand cranks, 1 plastic case and 1 "gear" which attaches to the window crank. The gear is in picture 3. Thanks in advance.

I know the pivot bar is 26-272 , measurements are 3.0 long x .500 end pc x .312 wide x .188 thick . with the holes I need on 1.0 x 1.0 centers a has a tee shaped end The pivot shoe measurements are 2.0 long end to metal plate and 2.125 long tip to pc that sticks up over metal on the one side ... (cont.)

The only one I see that matches on your site has stainsteel rollers.

These are windows from 1994. On the window, has 3 numbers: 83720511.1, SH 2850 and 2V1H6L Do you have these shoes?

Pat# 513929, lenght - 2 5/8ths, width - 11/16ths, depth - 7/6th.

I am trying to find 4 1/8" springs the same style as the 3" 70-097. Can you help? Thanks Ray W

The two look alike in your display. I'll buy both.

I need to replace the two spiral balance of a single-hung window. The tube is 24" long and 3/8 " diameter. It does not look like the ones that you have; please see attached photo for detail. The house was build in 1991 and the window came with the house. Thank you very much. Dave ... (cont.)

Hi, Attached are three pictures from a balance I need to replace. The only markings are 26 5 KW CMC 1 Thank you for your help.

Hello - Need help for the replacement of Andersen window sash balance replacment. I see following numbers on the current balance. I need to replace around 10 of them. Andersen: 11600-3 11600 - 17 also i see BP19 12#27 11-85 Thanks in advance Ken

I am interested in purchasing a replacement storm door latch for the one that broke recently. Your model 40-028 looks just like my previous one except the picture indicated the handles wouls go on the wrong side of the door (right side looking out instead of left side that I need). Are the handles ... (cont.)

am trying to find this tilt latch part i seen your companies response to some other posting thats how i can to ask you can your company help with either a replacment parts or to guide me to the correct company that made the part in question

Need to repair or replace this track. There are two sets of rollers...one pictured. They are riveted into the track. No idea which compsny made this.

I need 4 balances . Description: 1/2 inch wide 5/8 inch deep 30 inches long Pictures of ends included below:

Need some window lock keepers for a sweep lock. Sweep lock looks like your 90-025 window lock. Keeper holes are 1 inch apart. Keeper is 1 1/2" long, 7/8" tall and 7/16" wide. Thanks for your help.

Acme 4043-2 and 4043-1. ... bottom tab that fits in track is broken off of both of these pieces

Hi the part 26-351 that matches the measurements on web site were received (thank you) but they do not measure up in regards to either screw hole, the width or the length (see the pictures attached). Might you the part matches the measurements on your site as well as the measurements in the pictu ... (cont.)

says on bottom of tilt latch 5R and .075 down near end that retracts with it retracted says pat pending5,139,291 Latch is 2 7/8 inches long(main body) 3/4 inches wide