Viewing all customer Discussions for:

Other

Can you please help me find the right track for my closer mirror sliding Door. Bottom track damaged 72 in long.

Simonton Windows 9604181532 Plastic and metal parts broken numbers on metal spring: 5232208

The part is from a crank-out window. Parts number on the window lock that I need is 9429 40MM. When I put in this part number the exact part came up from a NY customers post, however.... I cannot bring up THAT PART in your inventory. Similar parts come up but have different alignment holes. My par ... (cont.)

I need two window latches for mg-5alicba milgard windows.

I have an aluminum door rom about 1972. I have two of these that have gotten hard to open. These have not fogged and keep out the cold better than some of the newer doors. I don't know the brand of the door. The doors thickness is about 1 3/32" thick. Is there a modern day roller either single or do ... (cont.)

Need to identify rollers.

This part is attached at the top of each side of the sash and engages the sash balance. When installing the new sash balances from you I found some to be broken. The length is 1-1/2", and the width is 5/8". Do you carry this part? Thank you, Mike

i need a set of balancers for a 24" x 16", Anderson Narrow line each window size, total 32 x 24 not sure what size i need...Any help?

This metal assembly appears to have a broken end. It's stuck about halfway up the side of the window track. Online it says this is the 'locked' position and to fix I need to insert flathead screwdriver and turn the 'U' shape into a 'C' shape. There's no U or C shape because it's broken off. Help! ... (cont.)

I need to know what this part number is

I ordered replacement latches but the ones I ordered are not even close - can you tell me which are correct so I can get them changed out. Thanks, Steve

I have not been able to locate this part, for a silver line single hung window made around 2000. Any suggestions would be appreciated!

I am looking to find replacement parts for my old windows

Please see pictures let me know if you guys sell them. Face mount is 2 by 1 3/8 Sash lock is 3 by 3/4

I am looking for a Floor Guide for Metal Framed Mirrored bi-pass closet doors. It needs to fit a door that is 1.75 inches wide. Most I have seen only fit doors up to 1 3/8". I have attached a picture of one that I have but need to replace another one. Do you have something that would work? ... (cont.)

Need a bi-fold door screw to repair door.

Hi there, I am a landlord in Whitehall, Pa and I have Certainteed replacement windows in my rental property. I need to replace a set of window locks on one window. These are over 20 years old but still in great shape. Can you tell me if all the window locks for these replacement windows are univ ... (cont.)

Looking to replace two sash pivot bars for window

As seen from the two pictures, I am missing the part that sits in the window frame to hold the window in and allow it to slide up and down smoothly. One picture shows this part and the other shows the other side and that it is missing. Can you please let me know if you have this part. ... (cont.)

Nothing found on it