Viewing all customer Discussions for:

Other

Is there a video to show how to re-install this part and the window?

glides for early 1970's Pella sliding window. Part is made of white plastic, 2&1/4" wide X 43" long with two raised glides.Would need seven, but would take ten, if you have them. Thanks, Ted

This is a 1/2" channel balance, the length of the metal channel is 28" (not including the TOP or SHOE). Do I need a series 380 or series 385? Thank you in advance.

we need the bottom drawer glide but were unable to locate the part on the merrillat website. Jerrold

need tow balances for the following windows - measurements are of the visible glass area - 28 1/2 X 14 right side and 36 1/2 X 24 left side is this enough info?? thanks in advance for your help

They were put in in 1991

I have been searching for where to get this piece for repair. I finally found the part number for the PHP-28 window 850 Please let me know if I can purchase replacement casing to get this repaired. Thank you, Cindy Ramsey 210-627-5514

Is this item Truth operator #11.14. If not, critical information is needed for the under sill dimensions. From, and above the frame mounting surface ,the clearance restriction to the sill cover is 3/4". This is the existing mounting conditions and is a PDF drawing on Truth's website. If your op ... (cont.)

looking for 7/16 screen frame corner with 1/2 inch spacer

slim shade operator

wheels for screen door.

Hi, I'm looking for the bottom metal posts (2) that attach to the bottom of the window itself (1 screw on each side would remove piece). These are the metal pieces that fit inside the pivot shoes on both sides of the window. Both of mine have rusted out/off. Thanks, Joe Anderson c- 810-355-5219 ... (cont.)

SLIDE, DRAWER, EXTENSION. STEEL BALL BEARING STYLE; SUPPLIED AS PAIR LEFT HAND AND RIGHT HAND; 2.125 IN. HEIGHT; 0.680 IN. WIDTH; 125.0 LB LOAD LIMIT.

I have 4 pivot bars that are broke on my Simonton Series 5000 windows and I need to identify part and availability Window #1 Information Part# 50813 Date 5/09/1997 2 CW M UPC# 201485201004 HS S5DHW127 Window #2 Information Part# 50820 Date 5/09/1997 2 CW M UPC# 2014852010

The two pieces of glass, one slides in stainless fussy channels. I'm looking for the piece that fits on the end of one and has fuzzy to stop air between them. Can you help? Peter

This sliding window is falling down because both sides are broken. I would appreciate if you can help me to identify this parts and /or ship it to me. Thanks in advance: Emilio

Could be from 2006. Slot is 1 1/16" tall x 3/16" wide

I need a replacement operator for a dual arm Truth Entrygard marked 15179 on the base plate and 31538 on the long arm.

Hi, The 32inch is a 9/16 and holds a non tilt window weighing 39lbs The 26 inch is also a 9/16 and a non tilt 28lb window Let me know if you need more details. Thank you, Mike

Want to replace deteriorated glazing on garden window. Not sure how to find the right material(photos p[rovided).