Viewing all customer Discussions for:

Other

Stamped 102-2, there is a right and left for each sash. The ones I need are for bottom sash. Let me know can we get them. Thanks, Steve

Hello Customer Care, I have included this 2nd set of pictures of the existing bypass closet doors on the rehab project we are hoping to soon complete in April. (please scroll down for pictures) The townhouse is located the Dallas, Texas area in a 25+ year old community....I was told that these ... (cont.)

I beam type trolley and pin attachment to sliding wood French patio door. See subject

Interested in new channel balances for 4 windows, both sides (l & R). Also need part on window sash that top guide catches into, are these different for left and right sides? i have more images then I was allowed to add. Thanks.

please direct me as to the correct widow balance replacement hardware that I should order from you to repair my double hung window. The window is fine, just needs a new 28 inch window balance on both sides. If you can provide installation instructions it would be greatly appreciated. Thank you for ... (cont.)

It looks like you have exactly what I need to replace a clients sliding door assembly & tracks.. I've attached a picture. It appears that the current door assembly has a "4011" stamped on it, but cannot tell. The wheels keep coming off the track, so I don't know if we need to replace the wheel as ... (cont.)

Hi, I was looking for the place where my Windows were made (Pacific Industries in Modesto CA.) and you guys came up. Maybe Pacific Industries is no longer in bussiness. Anyway, I have tilt latch windows that have broken latches. Can you help? I just need the replacement part. Thanks, Beth ... (cont.)

What one is the best match for this item was broke when I had bought it from someone there is two on top nothing on the bottom

Hi, Ever see these or know who makes them? They're held on with two screws and can slide to block off the hole. Grant

Hi I believe I ether received the wrong part or I ordered the wrong part. the balancer is stamped 24tgx and the one I received is stamped 24tg. the only diference I see is the color and how it attaches to the window frame. the color is not really a concern, but I do not see how I can make it at ... (cont.)

Hi, I was able to find the block and tackle link as your part #15-224 Would you carry the tilt pin that corresponds with that series of Hurd double hungs (see attached picture) Thanks!

This window part broke & I need exact replacement for Both right & left side. Thanks.

Im having trouble finding the part number for the top sash guide. Its an alcan window. Its 5/8". I see the part number for white but I need brown

Hello, I am looking for window glides for our sliding windows. Any help would be appreciated. Thanks, Paul

Code bb-2.....it is a little rubber insert for a weep hole at bottom front of window..

I need a rear replacement part for the right side of my 1987 marillat cabinet. These numbers are on the inside of the part. 471037

The channel balance is 28-5/5" long, width 9/16", depth 11/16". The sash weight is 21.2 lb. The balance is marked 28 C along it's length and BSI across as in the picture. Please advise what channel balance is suitable for these windows. Also, please indicate what the top and bottoms are. ... (cont.)

Hello, I purchased 4 channel balances from swisco last June. I writing because 3 have broken. Swisco sent a replacement for first channel balance that malfunctioned last year but that channel balance has also broken. When I install the balances there appears to be an enormous amount of tension whi ... (cont.)

e need to replace small cabinet hinge (tilt out in bathroom cabinet). No identifying numbers on present part.Attached is a picture of the part. The largest part is approx 3 7/8" x 1 3/4". No part numbers on them. They are on a angle opening vanity front.

Please see the following pictures. Please let me know if you need any other pictures. Thanks.