Viewing all customer Discussions for:

Other

My condo was built in the mid-1980's. The windows are brown aluminum. Other than the photos, I cannot tell you much else about them. Can you help me identify which of your inventory I need to order as replacements? Thank you P.S. I have weighed my windows & will be ordering spiral balances from ... (cont.)

2.3/8" Long 5/8" Wide 3/8" Deep Vinyl Window - bottom sash tilt latch - spring loaded. Does your co. make a replacement for it?

Part number 22d on window channel balance. Need full replacement assembly's

Hi guys, I am looking for replacement cranks and housings, both left and right for my kitchen bow window. See attached photoes. The part # I found underneath the existing ones is OP05-7554-03. Do you have these? And just as importantly, how do i get the old ones off? Very little room underneath for ... (cont.)

I am working on a project for one of our customers where the design indicates a cabinet door to slide vertically. The doors are approx 30" tall X 18" wide and would probably be in the

28 series 385 24 lb sash. Same28 series 385 36 lb sash what is proper # to order?

Do you carry a kerf style weather strip insert thicker than 1 inch wide?

Hello I have ordered from you several times. I have 4 broken pivot bars to single hung windows. The bar is 3 inches long. the jpg shows a broken one. The pilot hole is 1 inch from the back They are very rusted. The bar itself is shaped like a square"U"

Can you please recommend the replacement part number. Have my order for 8 others ready to send and need the part number for this one last window balancer. Thanks for your help Cathy

Need 10 if these.

I need a replacement door lock insert for a patio door. It is an Interlock brand lock US Patent #5,951,068. Please let me know if this is something you have. Mike Lotus Renovation & Design Co.

need 12 right and 12 left white dust covers need 12 right and 16 left white folding cranks

This is on the inside of all my windows on each side. Most are broke and missing. This one is broke and has paint on it. What is it where can I get a replacement?

Lock?

Please find attached a picture of a sash pivot bar I am looking for. It is from a Atrium 375 tilt out single hung window. I didn't really see anything that was an exact match on your site. If you have something of the 1/4" width and 3/16" height, I suppose the length is not quite as important as lon ... (cont.)

This is assumed to be from a MARVIN door. Distributor claims no corners are available. Marvin Door does not respond to customers inquiry. Do you have a corner like this? Can you advise cost? Thanks, Norm

ANSIZ91.1201 II SGCC-2627 1/2UA MDCA PVB DuPont LSG Handle is broken

There is no information that I could find anywhere on the door. The inside locking mechanism is broken; won't lock onto the catch that's on the door frame. Anyway of matching this up, or know where I can purchase a replacement? Thanks! Angie

length of balances 28 inches. width is 1/2 balance. width of the pivot shoe is 1/2 inch. the stampings on the balance is 2740. window is non-tilt. 15-001 seems to be the closest I am able to match up to my pivot shoe and the top 19-001. If you can please help me confirm that I am on the right path ... (cont.)

Your part 39-06 appears to be the correct handing however the pieces that attach to the moving window sash are not the same length or style - do you have a replacement operator that matches this one?