Viewing all customer Discussions for:

Other

Hi - this is 1.25 wide - .5 inch thick and 1.5 ish tall. It does have a hole in the side where the coil screws into it. I'll need a bunch - probably 30 ish.

the window says comfort worlk on the lock , it is a coil balance, the window sash is 32 wide x 22 height

Ordered 39-187 (installed in picture Crank 1) however the crank arm can't move any more yet the window still have a few more inches to shut. If order 39-089 will it fix the problem and more closely match the original (picture Crank 2?) Or do I need to order a completely different part? ... (cont.)

sliding door handle and lock inside and out

Can you tell me what all I need to purchase to put a keyed lock on this Milguard Sliding Glass Door? Thank you

I need 22 Top Sash Guide. The Picture is attched for size.

I need to order these

#2024

I have 6 failed rods that have code 2730 and 6 failed rods that have code 2750. I plan to replace both sides so I will need 12 of each size

I’m looking for the same slider model but in a slightly longer length—specifically 14-3/4". I’d like to keep the exact same depth and width as the original. Do you have a version available in that length? Thank you.

Windows are Certainteed Bryn Mawr III from approx 2009. The coil spring unit for the top window need replacement. Attached photo of part and ID number on the window. Look to replace both sides if we can determine what part will work. Thanks.

Hi, I bought a pair of these wheels from you about 5 years ago. Unfortunately this is what the ocean air does!

Hi,I'm looking for the following replacement part. At its widest it is 1 3/16''.

The plastic of the guide in the photo has degraded and started to crack and become brittle. The other drawer's guide is missing.

I have two screen door and there is this part that can be changed between the gladd frame and the screen frame but I can't find any more pieces that keep the frame in place

Missing one and on another window they won't latch

Several of my plastic clips to hold the rod have broken on my Nami casement windows. I have attached a pic of an unbroken one. Do you have a replacement part?

Need to replace all.

The broken balancer is on a bathroom window with the lower sash that slides up and down. I think the windows are from around 1991. I want to replace both sides, which should be straightforward if I can find the matching part. One side is functioning but old. The other the tab broke off that secures ... (cont.)

Unable to find this part