Viewing all customer Discussions for:

Other

It's hard to definitively read the part number, but it looks like PAT 4810108, but the 4 could be an A and the first 8 could be a 6??

The balance shoes on the top window are broken. 3/4 inch opening in the slot.

I believe it's a KL-2000 handle for an old Sears door.

NO BRAND NAME FOUND ON THE WINDOW. Distance from top to screw hole center is 1-3/8 inch.Channel width is 9/16 inch. channel depth is approx 1/2 inch. Top of guide is 1/2 inch by 13/16 inch. Part is symetrical for right or left. Please see if you can match, or offer something I can make work. Th ... (cont.)

hi- I need a replacment crank for the attached photos. Thank you

Hi! I have an old door handle and latch lock that needs to be replaced. Below are pictures. It has two 3-inch centered holes and there is a hinge mechanism on top of the handle that slides over a latch which is attached to the outer edge of the steel door frame. The house was built in 1950. The new ... (cont.)

Need one replacement handle as shown in pictures

Hi, I need to replace some window balances. The windows were installed in 1996. The locks have ALENCO on them. The backside of the balance has the number 740 on it.

[No content]

I have ramtrack 10124 track assembly on my mirrored closet doors in my rv trailer. I don't want to replace the tracks & everything else. Will these replace the bottom track guide? If so how do I remove the old ones. They are not screwed in, they look to be soldered, plated,welded, or something t ... (cont.)

These are for Milgard windows from 1989

Looking to Identify a Window Crank mechanism on a casement window, it is a wood sash with exterior vinyl glazing bead if that helps at all. I dont see a manufacturer tag anywhere, but the stamp on the mechanism arm says Truth 30805

On the door itself, there is a latch that usually extends and catches the door jam piece and that is no longer happening. Feels like something is broken inside the door mechanism.

The double latch locking mechanism is broken. It will not engage to lock. Some parts did break off.

I need 6 or 8 pairs

Hello, Hoping you can identify the type of door handle lock we need for our security door. The door is about 25 years old. Thank you in advance.

I need to know what this is called and where I can purchase a replacement

Hi - I have two 42.5 inch wide x 78 inch tall rolling mirrors for a closet door. The rolling mirrors are probably 15+ years old. A roller on the bottom of one of them snapped off. I would like to get a replacement part if possible. The roller1 and roller2 photos show the housing for the roller. Let ... (cont.)

Hello, I have attached a several closet door rollers that I am trying to identify/replace. If you sell these, please let me know the total amount for a set and the part number as well.

I need replacement cranks for Pella windows installed in early to mid-1980s.