Viewing all customer Discussions for:

Other

Stamped with "33 3 IO CALDWELL" measures 34" long by 5/8" (1" including end fittings)

I don't see any markings on this part. It is in a house we are flipping we just need the handle for the window crank. If possible.

I would like to get one of each the right and left hand covers

BIU

Will your 6' Sliding Glass Door Track work for this door/track Thanks.

Overlap sliding windows old types have Viking locks. It's a vertical fit types not parellel. Do we have any replacement

Could you please tell me which pivot shoe is the right one?

"6 LB" on one set, a 42" wide windowno marking on the other set, a 30" wide window

Hello i have this small Simonton window that needs the coil balances replaced. Not sure what info i need to get the part number or if its even fixable . And I also provided the measurement for the tilt latch. It is 2 7/8 long.

Attaching pictures for my non-tilt window. length is 33 inch and width is 1/2 inch Please let me know the part I need. thanks, Amit

This is a left. I own an apartment building. 22 windows were all replaced at the same time about 20 years ago. I would like to replace all latches in all windows. I'd like to order 25 Left and 25 right

Hi, I took out the parts from my window, and they have patent number 5.353.548 on them, which I saw on another post are your parts 15-086 and 15-087. The markings on the springs are: 4 38W 7 30W The windows itself weighs 21 pounds. Can you help me with what springs I need? I've attached pictures. T ... (cont.)

Looking for the catch mechanism for this Empire slider. Any chance you have the part?

N

This is what locks the drawer to the drawer glide

I would like to replace all of my window cranks as they are stripped and the handles fall off. I don't see that they make this part anymore. Can you help me find the replacement part?

Need a replacement for the spring and/or lock. The metal triangle holds the top of the spring.Channel seems to be 1 or 1-1/4" x 1/2"Spring is 1/2" wide.When spring broke it blew out the pivot stop at the top. That should be replaced too.I'm ok with replacing both sides when I do the work. ... (cont.)

I want to replace old existing door hinges with new ones that fit the same holes. I have found new ones that are off by about 1/8-inch with the holes. I have uploaded images of the hinge, including numbers on the back.

The Armaclad storm door in the photo I've uploaded does not open. The handle moves up and down. The bolt seems decoupled from the handle mechanism. The small lock in the picture is not used, i.e., door is not locked. Where do I find the part number given the circumstance or are you able to discern ... (cont.)

I believe I need this: Product Code: S385-27 Number on existing sash is 26 4 LV CMC 4 27" long 1/2" wide Bottom fitting is 1 3/32.