Viewing all customer Discussions for:

Other

Thank you for your response. The track in my drawer has a sliding metal unit over it (please see images #3, 4, 5, 8, 9) that I'm not seeing in your equivalent replacement parts. Is there another part I need ?

I need the handle the guts the lock everything for this door

Looking for a suitable replacement assembly for these.

Kindly advise if you have the attached parts and how I can purchase

Trying to locate this part please advise any inf or if you have available.

Looking for parts

Need sash balancer

The wheels I need are 1-3/4" diameter it is on a Fleetwood sliding door and don't know the series but it is al least 30 years old.

Usa

I want to make sure I get the correct product

I am looking for this part for my entertainment center My entertainment center was purchased in 1987Thank youBarbara

I'm looking for cabinet drawer stop. Width Inside 6/8 inch. This is where bracket slides into stop. 1 7/16 inch deep inside. Back side for cabinet mount inside 5 to 6/8 inches x and 1 7/8 long . Do you have something that will work? Thank You!

I am looking for quite a few of the pivot bars, receivers and coil springs

Hi! I have these blum 170 degrees frameless, full overlay hinges for a robern PLM2430B. I have contacted robern but they are not very helpful. The base plate seems to be a 195M 510-02, but I cannot find any one like it. Thanks!

Do you offer something similar?

Hi, looking for an equivalent channel balance replacement for this model number.

I see no markings. The white right has a channel ....the left white broke off .

I need help in ensuring I select the correct replacement channel balances for 13 GA windows. The balance is stamped 28 1/4 3 C. The actual metal to metal length is 29 1/4 and the width is 1/2". Thank you very much, Rob

Entry Guard Truth

Both Left & Right are the same balance 1/2 inch wide and 12 in long The stamp # on the parts are 1110 From what I saw of the balances the 395 series looks like the correct one The window is a single hung