Viewing all customer Discussions for:

Other

i need retaining strips for my Larson storm doors. the site says they are discontinued.

I ordered 20 pieces of Part# 55-060 6' Acorn Glazing This is the wrong glazing for my windows.I cut 3 pieces before I knew this,C The glazing was wrong.Can I return the 17 pieces and purchase 10 pieces of Part# 56-011 6' length.

I need 6 as in the pics. They are 27 inches on just the metal channel. Channel OD measures at 5/8" wide. I also need 2 with the channel length is 15" Longer one are marked 26 3 40 Caldwell. Shorter is marked 14 2 40 Caldwell. All end hardware/fittings are identical. These are from Mercer win ... (cont.)

What brand is this and do you stock them? Drawer soft close mechanism.

18-066 looks like it's designed to be cut to fit left or right. see attached photo for the item i'm looking for. dimensions seem to match

See images. Need to find a replacement to this foam vinyl weatherstrip.

I am located in Surrey Canada, and have contacted many companies to come and look at this window, and they were all telling me to replace it. I don't think that's the case as it seems that the coil balance on the left-hand side of the window is cracked. I feel it's a much cheaper fix than spending 2 ... (cont.)

Hello, it looks like I ordered the wrong part. I ordered the S350-28, but it does not have the flanges on the opposite tip compared to the old one in the photo. I assume that is why the handyman could not get the guide to stay in place. The closest part that I see is the S380, but it has flanges on ... (cont.)

I have a casement window where the metal bar fell off as I opened my window due to the plastic holder decay. See pictures. The first photo is off the decayed plastic holder and the second one is of the plastic holder in its complete form.

Looking for door hardware for a 6.8 Marvin exterior French Door. The info I found on the door is as follows (hard to read, so may not be exact): CTG Tempered; 16CFR 1201 II; SG CC 1804 1/8U; 1GCC CBA; 1GMAC CIG-1; 4-99

TAFCO (?) two-light crank out casement window installed 2004. [Turns out contractor used discontinued track-lighting units - unsurprised when I couldn't find window ;->] Cranks still work, but mountings for the 23"x.50" flat vertical rod in each window broke. Zoom = some ID on glass. Thanks fo ... (cont.)

I need to get something that's 32" into my condo. The outside screen removes, the inside sliding door removes, how do I remove and reinstall the fixed glass panel.

Left door, inside top pivot pin. Also need the guide in the top rail.

Black plastic piece has broken on several windows

Hello, I need 4 window pivot brackets for my Harvey windows. The pivot brackets have a number on them, 14030. I also need sash vent latches. The part number on those are. 5,806,900. I need 12 of those. Attached are the pictures of the parts

Hi, I'm Looking for the part in the pics for a Polybau vynil window. Thank you, -David

Recessed keeper 3/16 " depth. Cannot locate on your website

I have a 40 yo condo in Florida with single pane glass and alum. frames. I need to replace all the plastic top guides on 10 windows. Don't know make of windows. Also will need a few Channel Balance Spring sets. They are marked as: 17B, 11A, 29B and 29C

i looked at the picture of lav door knobs the width is ok but will (Suggested 10-562) they operate this part of the lock

698.245.59.00