Viewing all customer Discussions for:

Other

When engaged, this part projects a small tab of plastic into the path of a window preventing it from opening further. After heat and sun exposure, these break readily when the window operator opens the windows with the tab in the down position.

My balance bar is 27 inches long. It is for a vinyl single hung window that was installed in 2008.

I'm looking to identify these parts

Do you have something like this? Thanks.

When replacing the 15-045 pivot shoes there is not a slot for the sash to go in it is closed so do I have to raise one end of the sash higher than the other to fit into the pivot shoe? Does this pivot shoe lock in place without the sash installed to aid with installation?

Hello, one of the tracks for my closet sliding door has been damaged, and I'm looking to replace it. Unfortunately, I couldn't find a similar one at the local Home Depot. Additionally, I've checked your website, but the specific track I need, which is 70" long and in a gold satin color as shown in t ... (cont.)

From metal to metal 16 inches. There are no visible stamps to help identify the window balance. Only a 180 value is molded on the plastic on the bottom of the balance.

Attached are the parts I removed from different windoes, please send me the link for each of the part. Thank you.

Looking to fix this problem with doors key way turns several times before locking or unlocking with new cylinders fix this

1890. 25bsiWindow balance needed1 for each sideSee picturesCan

I purchased a house with metal bifold closet doors. Some of them are missing the plastic end caps that attach to the metal pivot pins that ride in the bottom track. With the plastic caps, the door is quite quiet when opening or closing. Without them, they make a loud grinding sound? metal sliding ... (cont.)

Screw Spacing was 1 1/4"

I don't see any numbers on it, hopefully it's recognizable but it's a little on the older side.

Please provide help to identify part number og pivot Shoe for Silverline window 2900 series.

Stamped code: 29 3 ON CALDWELL length of metal part: 29 inches I have more photos if you need them. Thanks all.

Greetings, I am looking for Kask el storm panel latches. 3 1/2 by 1/2" annotated dimension on photo. John

It looks like your part #39-324 might be a replacement for my hardware shown in the photos. The two dimensions given in your photo match my piece, but is the width of the plate with the gear mechanism 5" like mine? Also, what about the screw hole pattern?

I need weather stripping for 20 year old M&W wooden windows for the top and bottom sash where they seal against the frame. A picture is attached. The bulb is about 0.350 inch in diameter, roughly. Do you have weather stripping for this window?

I have two old windows and they are missing clips I need four

Can you get your hands on this pivot? It's an Anderson window. I'll need two of them. Thank you.