Viewing all customer Discussions for:

Other

The function of being able to lock this door is not working. We removed the above part in hopes of figuring out what was wrong. In checking it out we determined we needed to get a replacement part. We need to know the correct part, as there is no number on the part to help us in ordering it. We do k ... (cont.)

27 inches

We have 7 windows that are to tilt in and they are loose and do not catch to tilt. We need the pins to hold them into place. Please advise type of pin we need for these windows.Thank youDiana

looking for Andersen balancer BP21 12#27 11 - 85 left side from inside of window

I have no idea who manufactured this window. Then metal pin broke off and I just highlighted what I need and it's brand (maybe?). Thanks,Eric

NEED the RIGHT PIVOT SET. The one I have looks similar to a pivot set from US Aluminum, your Product Code: 79-097, but I am not sure. The door swings to the inside of the building and when you are facing it the handle is on the left and the two pivot hinges are on the right. PIC's 2059 and 2062 show ... (cont.)

Attached are the original drawer guide parts to our dressers. I'm including a picture of the part on the back of the drawer and also attached to the guide runner. Can you identify the replacement parts? It looks like the originals are made by Kenlin. I need 15 of each part.

Hi, I'm looking for this guide that fits into the bottom groove (4th pic) of my 6-pane double hung wood windows. Thanks! Nicole

The pin is 4 1/2" long. The picture is from another door. I would use this one but cannot get it out.

Dear Sir or Madam,Reading the previous posts from Austin Texas, it looks like I also need part S395-28 with the 2740 option. Can you please tell me if this is correct? Also, is the the correct link to this product: https://www.swisco.com/28-Series-395/pd/Series-395-Channel-Balances/S395-28Thank you, ... (cont.)

Seeking seals for wood sliding glass door. It's the seals where the door meets when closed. Cannot locate brand. Sticker on glass says Tempered 16 car 1202-cii ANSI z97.1-1984 1/8u soccer / 1436 8s6206a Seal is 78" tall, 3/4 " thick, 1&1/2 wide

The glazing pictured comes from a transom window. Bottom 1" Vertical 1/2" Return 1/2" with rubber gasket Need approximately 350LF to repair failing components at an apartment building in Raleigh, NC.

Plastic piece that covers the balance on my window

Bad hardware on a vinyl casement

Hi,I have 7 Marvin Windows - all were installed in 1986 when we built the house. All are the same except the sizes. The sashes tilt inward and can be removed for cleaning.Lets start with just 1 window:The metal in the window is stamped with: "Marvin-01-IGCO r CBA 86" (see picture).The Balances ... (cont.)

Will this work on a Andersen thumb latch Part Number: 1997189

having problems with the window staying up and the pivot doesn't come back up with the window was thinking it was a bad pivot lock shoe. please advice. thanks chris

the only marking is a 5 on the top coil and a 6 on the bottom coil. 12 of these need to be replaced in 6 windows. Do you have the assembled unit available? The window weight is 20lbs, the window length is 29". Coil thickness is 0.510". The overall length of the plastic piece with the 2 mounting h ... (cont.)

Hello, looking for parts. Specifically pivot shoes. Do you have parts for this model? Thanks! Chris

Window was installed in 1992. Number on bottom looks like 7?08 and 07900 on the arm.