Viewing all customer Discussions for:

Other

Hello, it looks like I ordered the wrong part. I ordered the S350-28, but it does not have the flanges on the opposite tip compared to the old one in the photo. I assume that is why the handyman could not get the guide to stay in place. The closest part that I see is the S380, but it has flanges on ... (cont.)

I have a casement window where the metal bar fell off as I opened my window due to the plastic holder decay. See pictures. The first photo is off the decayed plastic holder and the second one is of the plastic holder in its complete form.

Looking for door hardware for a 6.8 Marvin exterior French Door. The info I found on the door is as follows (hard to read, so may not be exact): CTG Tempered; 16CFR 1201 II; SG CC 1804 1/8U; 1GCC CBA; 1GMAC CIG-1; 4-99

TAFCO (?) two-light crank out casement window installed 2004. [Turns out contractor used discontinued track-lighting units - unsurprised when I couldn't find window ;->] Cranks still work, but mountings for the 23"x.50" flat vertical rod in each window broke. Zoom = some ID on glass. Thanks fo ... (cont.)

I need to get something that's 32" into my condo. The outside screen removes, the inside sliding door removes, how do I remove and reinstall the fixed glass panel.

Left door, inside top pivot pin. Also need the guide in the top rail.

Black plastic piece has broken on several windows

Hello, I need 4 window pivot brackets for my Harvey windows. The pivot brackets have a number on them, 14030. I also need sash vent latches. The part number on those are. 5,806,900. I need 12 of those. Attached are the pictures of the parts

Hi, I'm Looking for the part in the pics for a Polybau vynil window. Thank you, -David

Recessed keeper 3/16 " depth. Cannot locate on your website

I have a 40 yo condo in Florida with single pane glass and alum. frames. I need to replace all the plastic top guides on 10 windows. Don't know make of windows. Also will need a few Channel Balance Spring sets. They are marked as: 17B, 11A, 29B and 29C

i looked at the picture of lav door knobs the width is ok but will (Suggested 10-562) they operate this part of the lock

698.245.59.00

LOOKING FOR A PELLA WINDOW OPERATOR WC/CC FOR AN 11 1/4 X 15 1/4 WINDOW...SEE PHOTOS ATTACHED.

Looking for the plastic roller for a lawyers bookcase. The glass doors slide out and pivot on these rollers.

The original is the operator stamped townside is the original, on the opposite it is stamped 'entry guard truth 40754'. The operator is the one I ordered as a replacement. Everything works well with this operator except that the ending of the arm is not the same bushing. Is this something that ... (cont.)

This piece broke I need to replace it

Hello, We are looking for this type of weather stripping, but thicker please. Thank you for your help.

Length metal channel: 25 11/16" Stamp: 25 4 B81 TF Manufacturer: Unknown, Date: approx 20007 channel width: 9/16" channel depth: 10/16" Count: 2 for now, if these work well then I have more windows to fix. Some same length and others with longer channel length.

Looking for replacement lever for this. It is Silverline Windows by Anderson and is foldable