Viewing all customer Discussions for:

Other

Looking for a replacement casement window operator. Markings show Truth 30744A. Thanks!

Looking for piston

Hi there, have 2 windows that need lifts and any other possible hardware for repair 29 1/4" long ANSI/aama 101.85

The O-ring/wheel ball at the top of the closet door is starting to disintegrate, one has disintegrated need to replace all four door glides.

Window Latch original to house built 1952, was installed on Anderson casement awning windows. Copper plated.

I am looking for a lower check rail/top glazing bead for a 1997 Andersen Permashield Narroline double hung lower sash.

Ipurchased a bay window in 1989!! and now the crank part works,BUT the thin vinyl piece that goes between the crank and the crank hardware snapped and I have to hold it in to close window...since it is so old, do not know manufacurer and the company I bought from, has gone out of business I think - ... (cont.)

I need pile weather stripping that is one eighth inch wide at base and three eighth inches tall. It is for a door 84 inches tall and has two of them on this length so 176 total

Hi ~ Looking for replacement part - plastic screen guide. Need a dozen if possible. See pics attached. Thanks!!!

Hi, I have a Shucco casement window installed in 2004. The crank has come out. Any idea what I need to replace it with? The window itself is fine. I can insert the handle/crank back in the hole and turn it to open it, but it doesn't go all the way back in and I can't close it. And of co ... (cont.)

For Alumumin Windows from the 1970's This is one of the originals. As best I can tell it's 1/4 in height and 13/16 in width. It's slightly curved on the top

29" long balancer with the code 2830F. I cannot find the part on your website. Please see the photos and tell me how to get the part.

Trying to find an identifier or replacement part for this kitchen cabinet hinge. Any help would be appreciated.

this is a brass roller 1/2: in wide

I have enclosed a white crank handle and a Brady colored one. The white one and brassy are ciompatable to each. I cannot find in any Hardware store, can you help

We have bi fold doors that either don't slide on the top or bottom. I need help to identify part #'s. Let me know if you need more photos. Thank you for your time!

The overall length of the handle is 8 inches. The screws are 4 inches apart.

Looking for the part to repair my closet doors. The large part of the cap is approx 5/8" and the total height is out the same with the hole on the large side?. Looks like 3/16". Help!

Hello Swisco Do you have this weather stripping ? Or something close? Send me a couple options if so ! Thanks so much

Please help identify the balance in the attached picture.