Viewing all customer Discussions for:

Other

Good afternoon, I am in need of four Non-Tilt Channel Balancer, dimension 29 inches in length and 1/2 inch in width 29x1/2 inch. I am in need of four quantity of them.

Nuprime window. Top sash guide has number "3031". Can anyone match this to a current model?

I went to Home Depot and they were able to see your name on the handle. They went on the website and recommended 40-039 for keyed deadbolt and 40-150 for the white inside handle. I can't find the outside handle to match up with it on your website. I went to your office with the parts in the picture ... (cont.)

I recently purchased 15-191 - Heavy Duty Pivot Shoe, 1/2" Thick but I realize now I also need the matching balance. Can you help me identify what is the balance that would match this shoe?Thank youJohn

Hello! Due to old age and exposure to our Florida sun, one of these latches has become brittle and broken. I've included dimensions in one of the uploaded photos. There are no apparent markings on the windows or latch. Hoping your company is able to help us out! Thanks in advance, Jonathan ... (cont.)

I am looking for everything I need to replace the coil balance system on my double hung vinyl windows. I cannot determine the maker but they are approx 27 years old. On the Coil it reads: OMEGA #3, 5 33" The privot shoe is 1/2" thick and approx 3-1/16" wide. The Coil carrier is 3-1/4" Long and 1-1 ... (cont.)

Parts is from a patio door that I have never laid eyes on. It appears to be some type of slide lock for what I assume is a sliding patio door. The owner left it on my desk a requested I find a replacement. The only markings are the globe symbol with WORLDWIDE stamped in it and patent pending on t ... (cont.)

Please identify

Looking to be able to lock the door from the outside

These are from built in screens for Pella windows. Many strips are cracked and broken

I have 24 31x74 wood double hung windows installed in 1999. Every one of the friction shoes on the bottom sashes has broken. I believe the 15-104 shoes will fit but have a question about anchoring the top of the springs. The upper sash spring is on an s-clip but the lower sash spring appears to hav ... (cont.)

Hello, I need to replace the base track for 5' opening Stanley bifold mirrored doors. (2/ 30") 243514 Ty

Looking to replace these rollers on these American Mirror Doors

I'm looking for the Leigh 1 3/8 rollers for my closet doors

I need help locating a replacement handle for my sliding patio doors. The measurements I have for this handle/pull are as follows: White base is ~7.5 inches from end to end Brown Handle is ~9.5 inches from end to end There is ~4 inches between screws There is almost 5 inches between the whi ... (cont.)

Plastic part holding a spring/rod and string fir counter weight is broken. Thanks for your advice. Dean

Hi, I have a few of these double hung Pozzi windows from around 1999-2000 time frame that the balance assembles are no longer working and the windows sag or will not stay in position when opened. They are wooden interior and clad aluminum exterior and are about 6' height and 37 inches wide. I a ... (cont.)

I am looking to replace the crank window hardware pictured.

This is for my door

I noticed one side of my window is missing the plastic piece at the top of the sash that catch the balance spring. I just purchased balance springs part# S390-29 option 2840. The window track is 1-1/4 inches wide and the sash is about 1-1/8 inches wide. Do you sell these plastic window catches? ... (cont.)