Viewing all customer Discussions for:

Other

Good morning Can someone please help me with these closet rollers? Greatly appreciated Thanks Adela

This broke from the top when I was closing the window. Attached are two photos, one I am holding up the string and another letting drop. The visible glass on the lower sash is 36.5W x 23H Seeking advice on what I need to have someone fix it. Already tried Pella service.

Further to my recent telecon on the above, pls see attached the images of the current balance and the top sash guides both of which need to be replaced The balance length is 29" and the width is approx 1/2" As i need these very urgently, I would really appreciate your help in identifying the part ... (cont.)

please help with suggestions.......lots of windows to replace weatherstripping if you can help........about 0.5" wide......tks

Hoping you can point me in the direction of which replacements I should order, please and thank you!!

Hello i want a quote for 4 pieces of the glazing beads

I have a casement window similar to the one in the attached picture. The track is OK, but the black piece that slides within the track is damaged, and I need to replace it. I do not know what it is called. Can you please assist? P.S. I am a returning customer. I recently purchased a casement window ... (cont.)

I need help with ordering the right product. I need a hanging rail socket. I am not sure which one to get. Please see attached photos.

Need replacement flipper ( I'm not sure of which part I need ) handle is marked with JW, and the mortise lock as well 82-260. They described the finger turn as about to fall off. What parts will I need? Thanks, Mike

Can't find any numbers on door or rollers need new rollers or parts to rebuild and track insert for replacement rollers

I'm looking for plastic guides about 3 in wide and 14 in tall. The guide is placed on the side of the window, and slides into the window jamb and is secured with small nails.

This is a Grass cabinet hinge. (850-01) Outside diameter is 1.28", or 32.7mm. Screw holes are 2" apart.

This is a part that came out of the jamb liner window slot. It is attached to a cord to help lift the window. I'm trying to find this part to fix the window. Any help would be appreciated. Thank You David

I have a window that the bottom roller comes out of the guide when you open the window then try to close. I also need window crank covers and handle for this window.

I'm unable to locate a part with a latch the same size as what I have. The door is approx 3 years old. I can't find any numbers on the handle or latch. Thanks.

The arms of this operator are labeled "Truth", but the manufacture of the windows remains unknown. The width of the internal part is 5 and 1/8. Difficult to accurately measure arm lengths with operator in place, but I've added a ruler to some of the photos for reference. Also noted six screws in ... (cont.)

Hello ~ I'm looking to get the Simonton Pro Finish Contractor series balance assembly. Do you sell them?

Knob shown has Brocken off. We need a replacement inside turning knob since the metal has cracked off and an exterior lock with new keys.

Hi, I already bought S380-27 with option 2640 (27 inch series 380 channel balance) while fixing that i found that the top sash also broken in my window and i want to replace that to. i have attached photos of the top sash from the window. please confirm the part number to order. Thanks, -Sathiya ... (cont.)

Stamped 2620F Metal is 27" long. Plastic shoe depth is 1-3/32" What is the correct replacement balancer? Thank you for your time.