Viewing all customer Discussions for:

Other

Do you have this part of something that will work? My cabinets are only 6 years old.

Measurements: 7/8" thick 1-5/16" wide 1-1/4" high Shoe is attached to a triple spring coil spring. Not sure what brand of vinyl window this is from, but I'm thinking maybe a Simonton.

I have a Pella patio door and my rollers are worn your product code 81-098 seems to be the one I want, but it does not have ears to prevent it from fitting too deep into the door.

Need to replace mortise lock. Hook lines up correctly, but the hook and latch is loose. Can open door in locked position.

Looks like there is a # 9

I am a lead maintenance tech and I need that part

I'm looking to find a replacement for my window balancer. I have a handful I need to replace so I don't have all of the sizes/markings yet, but I wanted to start with this one so I can buy two. Thank you. Markings: 86 29-4 FC5 CMC 08 Channel Length = 30"

Roller assemblily for sliding glass patio door. Older no markings. Steel.

Can I buy just the wheel and it's piece that slides into the mechanism or do I buy part # 23-064. It appears to be a perfect match. Justin-

i need 4 of these. it is a tilt latch on a single hung window

Drawer slide 21 5/8" Cabinet bracket 23" mounts into plastic bracket in back of cabinet.

I have this 3 panel sliding patio door. One of the stationary panels is missing a bracket. I'm not sure of the manufacturer of the door, but all our windows are Anderson. Home built in 1995. Do you have a bracket like the one I've sent a picture of?

Looking for a replacement

Small piece that attaches from the arm to the track of the window to swing the window open and close

I have Quaker Manchester double hung windows most of them don't hold theirselves up anymore the plastic pivot pieces are broke and can't find the parts for them

Balance length: 29".Good afternoon,Attached is all the infromation requested as per video instructions. I Will like to know the type of balance required to replace the ones on the picture, cost and ETA.Do you have these in stock and if not where can find them. Thank youJenny

Hi: The channel balance Dimendions are 26" and marking numbers on the back are 2520 BSITH. I have included the photos.

I am looking for a closet door wheel assembly (Stylmark) with a 1 1/4" wheel, photo attached . I would take both right side and left side if available. this one is the right side one when facing the door.

I think the spring in the handle is getting worn. It is difficult to lock at times. There are no markings in the hardware of not the same set a nicer look would be acceptable we're looking for 2 replacement sets

I need to replace self-closing drawer slides to two kitchen cabinet pan drawes. The drawer slides fixed to the drawers are 21-5/8". The drawer slides fixed to the cabinet side are 23-5/8" ? Is that how the pairs of slides come ?