Viewing all customer Discussions for:

Other

This part hooks into bar to allow window to slide up and down. Do not know make

Roller dia 19 mm c 6 mm thick, And 12 mm dia x6mmthick

Hello, thanks for the reply. Here is my reply with pictures. However, I have taken a close look at the jamb liners, hooks, and balances. Here are my conclusions for these five double hung Marvin windows from circa 1988. Jamb liners: Most of the jamb liners show wear (breakage, bending, crack ... (cont.)

Same profile as an Andersen, just a little off.

lock lever - US Pat. 4.674.777

All I need is the string to pull the mini blinds up

any chance you can help me out

Hi, the meeting railing my 1999-era upper sash broke away from the frame. I tried to re-insert it after removing the 2 7/8 inch flat keepers which had previously been broken by a thief. However, now it is arc shaped. I tried heating and cooling it with a hairdryer, but that did not work. If I repla ... (cont.)

good morning: I am in need of located about 12 to 20 of these corner keys for my window screen frames. They are very flat and plastic and are all breaking while I am attempting to replace damaged screen wire. Let me know what other information you might need to help located such a thing. ... (cont.)

Need Replacement channel balances for tilt type double hung window. Specks are as follows. Please help us identify the correct parts. We need a pair of balances for bottom window only. Window sash height: 30.5" Window weight (single pane) : 26.6lbs Balance Stamp: 4035FF Balance length: 40" Bala ... (cont.)

I am in need of some Milgard channel balances.One is numbered 20 3 DV CMC7 x2And One is numbered 32 5 GV CMC2 x6 I appreciate any assistance in getting these replacements. Thank you ,Tony

I purchased the replacement crank, but do no have enough room to turn the screwdriver 90 degrees. Are the any tricks or suggestions to remove the crank without cutting or drilling the wood?

Length: 25" Stamp: 2440C B.S.I. Manufacturer: Unknown Additional: House was built in the 80's, wood frame windows Count: Just need two as all other windows pivot outward

hard to open from inside, latch does not retract all the way, which will be the price for replacement and ETA. Thank you

I am missing the right side looking from the inside, that keeps this window locked and not fall out. The picture in windowdoor 1 is of the left side. Hopefully you will have this part. I can also be reached at Mike. Thank you for you assistance.

I own a house with pella casement windows. the house was constructed in 1987. i bought some replacement window cranks thru Swisco which have worked well (39-175 & 39-176 units) for several of the larger casement windows. However two of the casements are somewhat shorter than the rest and have a diff ... (cont.)

Help , my windows won't stay up and nobody can help me because the window are very heavy. This is what came out of the window. Do you have something that can replace the existing ones. Thank you in advance for your time.

The hole spacing is 2-1/8". Please quote the price for two of them. thanks,

I need to replace one of these right hand window crank. Please advise. 1 3/16 inches wide 2 1/4 inches long 1/2 inch thick Shaft is 1/2 inch inside Shaft protrudes 1/2 inch

12 windows need replacement partsJames