Viewing all customer Discussions for:

Other

The only identifing name on the latch is what looks like "WW". The latch is 3 1/2 inches tall.

The numbers stamped at the end of the balance are 1031 S50 499.

Opening cut in window is 3.25". Part # are E 17055, E 17074, E 17056 - no other markings.

I'm trying to find the replacement handle for one of my sunroom windows, but the part doesn't have any part numbers or identifications.

Unable to find a brand My guess is an American Craftsman

I am looking for internal screen corners. Each leg is 1/4 x 1/4 the legs are about 1 3/16 long

Hello I need to order this part waiting for a callback

Looking for coil balance assembly for Alside Excaliber 2000 Series double hung window. Picture of pivot shoe attached which measures 1.25 inch wide and 0.5 inch deep.

Looking to purchase a towel holder like the one in picture. It's 28" center screw hole to center screw hole.

Hello, I'm looking for this type of lock for an in-swing door, however I would like it keyed. Any idea where I could get something that would work?

I am a designer do a remodel on a home with KK Windows. I am wanting to change out the crank levers and latches to white, along with screens. Is this something you would be and to assist me with?

Part is 3" long but does not have any markings on it. Sliding door is probably from the 70s. Door frame does not have any markings or name plates. Thanks for any help!

Client is looking for a replacement track for window . Current track is 60"

I have Phillip windows single hung I ordered #26-378 3" did not work can you tell me what will?

Hello, I am looking for replacement metal pivot bars for this window and also the plastic locks. Any help much appreciated. Thank you

Need to replace weatherstripping for 22windows (18"x48") pictures enclosed.

Tilt Markings 08 102 22B

Hi, I am trying to replace two rollers for my sliding glass doors. Unfortunately, there are no visible markings or names on these doors. They were part of the house when I bought it back in 2020. Please let me know if you can help me identify the correct parts. I already purchased Item #81-090 from ... (cont.)

Attached are photos this time of a roller that easily slid out that rest on pin as shown. The remaining assembly if it can be removed is not budging. In the past I've ordered the roller kit but the rollers were too deep and would run only on the outside edge and cut the track since they could put no ... (cont.)

Has anyone in your company ever seen a latch bolt like this?