Viewing all customer Discussions for:

Other

visiting my parents house, noticed crank handles are stripped out! Handle has number underneath 60-C-7041-62 5 Are these possibly Andersen crank-outs? The bar on the window where the arms slide are corroded and need lubrication. I think that's why the crank handles are stripped. Dad's remedy was ... (cont.)

Good afternoon I require replacement door runners for the top of my sliding wardrobe doors, I have attached a picture of one, I would require 8 pairs, can you help? Kind regards Dave

Hello! Can you tell me what parts I need to replacement this broken door handle and lock?

WeatherShield was able to find these drawings of my operator. Can these help you identify an operator match from your catalog

Hello, Attached are 4 pictures of a glazing bead I am trying to replace. Please let me know if you carry this, what the product sku is. If it can be cut to size and if that is more expensive than just getting a stock length. Thank you.

I have a Crestline Casement Window with it's plastic weather strip molding cracked and brittle. Are there replacement pieces for this?

Hi! I am in need of replacing several casement window cranks in my home. Home was built in 1964 and in Minnesota if that makes a difference. I'm having difficulty finding replacement pieces. The first 4 pictures are of the one I am needing now, the last picture is what it looks like in operation. Th ... (cont.)

25+ year windows. Plastic housing, metal wheel. Measurements in inches Assembly length 1 13/16 Assembly width 3/8 (has to be

I need to replace the track for bifold mirrored doors in a house we bought, all I have is the numbers on the back of the doors and what's currently there. I need both a top and bottom Track

I am looking for the latch pictured above for an aluminum sliding window- circa mid 1970's.

Need help identifying inset weather striping. It sets into a half inch groove.

Need replacements for a Windsor non-tilt window. The metal piece is 34 inches long and there is a 3340 shaped on the side.

Please see the images - I recently purchased a Pella sliding door, 8'-0"W x 6'-8"H. The door is approximately 2" thick. The door did not come with any handles. There are (4) pre-drilled holes, one hole second from the top, is for the lock. The three larger holes, 1/2" diameter, align top to bottom. ... (cont.)

as per photo, the windiw balance is at the right side, my window slides up and down, I need the window balance or the right and left side withe the dimensions as listed: L = 25 5/8" , D = 5/8" and width = 9/16" or 1/2" I need the assembled one.

Please tell me which part number and kind of Channel Balance I need to fit my windows. I have attached photos of my original part. Would appreciate any help you can give me.

Do you have same type of tilt latch

I am looking for parts for this Pella screen door. I believe the 83-128 handle/latch kit will work with the 85-023 latch strike. Is that correct or are there other alternatives? Thanks very much!

This is a picture of the front. It has a coil spring that broke off.

I need a replacement for this plastic part that holds the lefts side of the drawer .

Need replacement for this balance.