Viewing all customer Discussions for:

Other

Hello, I'm looking for a matching handle to install to fit an 82-265 mortis latch. I'm unable to find this as I have two doors so I would need to find this exact part to have matching doors. Thank you for your help in advance.

I need to replace 3 Caldwell balances. All three the strings malfunctioned.The(metal)length is 27".From the picture you can see two of the stamp codes are the same but the third is different. No sure if that makes any difference. The codes are:Caldwell 26 4 LNCaldwell 26 4 LNCaldwell 26 4 GNOf the t ... (cont.)

Hello, i can't figure out what brand of window i have and what part numbers i need to replace the broken pieces. Please let me know if anything in the attached photos gives you an idea of what brand and part numbers i need for replacement. Thank you very much

looking for Kinro rv window glazing bead seal i think its a 8600 series window its on a 2012 KZ Stoneridge

For screens- White Nylon Slide BoltsNeed to purchase Looking forward to hearing from you soonThank You Beth

My window has a broken spring in the left side track. One of the photos above shows a S/N and a Series. The track that the spring mounts into is 1-9/32" wide x 17/32" deep. One of the photos shows the broken spring with cartridge and stop. The other two photos show the unbroken right side spring car ... (cont.)

Hi there! Firstly, thank you very much for this service, even if you cant help me. We have a sliding glass door handle that broke and needs replacement. I have attached 4 photos of the handle that will hopefully help identify. Any guidance would be greatly appreciated. Have a great day! ... (cont.)

Andersen 11600A-3 stamped on front 11600-17 stamped on back 725 BD42 2 90 stamped on mounting flange Please confirm SWISCO replacement part product code is 24-737 Thank you.

Truth Window Crank RH 45136 1st arm is #30905 and second is 40351 Part for frony window to crank open and close. 25 years old.

I bought an older beach house. the sliding doors are hard to close. There are no rollers to remove. I did take a picture. I'm not sure if it helps.

I have a PGT SGDH-6 handle (double latch) on our PGT SGD770 hurricane sliding glass door that I need to add an external key lock. I attached a few pics. Will this external key lock work on this handle?

What do I need to purchase to replace this?

Looking to replace the patio door handle lock.

25 5

I need to know if this style of latch/lock is available. Height 3" Width 13/16" screw holes are 2 1/8" on center Big hole is 1/2" This is installed inside the frame and a post style latch goes through the big hole to lock. Let me know if you have any other questions. Thanks, Frank ... (cont.)

LOOKING FOR MITERED SCREEN FRAME CORNER KEY

I'm looking for six Sterling by-pass closet door tandem wheel hangers. The nylon wheels are 3/4" in diameter and are embossed with STERLING 2550 on one side. The offset is about 1/2". The centers of the mounting holes are 2 7/32" apart.

For Simonton door in Del webb, sun city Huntley illinois.

is there a replacement for this

Cant find anything about this lacth. Locking door latch, gear stripped so lock does not fully engage. No mfg info on parts. Can you identify for replacement? Thanks, Randy