Viewing all customer Discussions for:

Other

Can you identify and suggest replacement weatherstripping for an older late 1970's to early 1980's Norco wood casement window model 3N48? This is the stripping that goes along the top and bottom of the window frame and is different form the leaf weatherstripping (55-106-6) that goes around the sash ... (cont.)

looking for the little metal piece that goes between the outer handle to the inner handle

#32 is marked on one end. Length of steel is 32 5/8.

I need the replacement parts for these items. Any help in this matter is greatly appreciated. Ty!!

Length of metal channel is 31 and 11/16 inches Stamp printed on channel is 31 5 Milgard manufactured in 2006 Note: Metal hook in photo is pointing to the top of the channel. We turned it to face the correct way, but one of the pulleys was jammed, and couldn't be fixed I need four channel balances ... (cont.)

Missing this part that goes in the hole

I am looking for a 6 window balance set with the following dimensions: - channel length: 25 inch - depth/height: 1/2 inch - width: 15 mm (sorry for the metric) - weight window: approx. 16-20 lbs Pictures attached There is stamp on the balance: 24C

Hi! I am trying to find the correct sash balance for my center window in 8' bay. This window was installed in 1986 so my guess the part numbers have changed since then. The number stamped on the old balance is E48 9#27 9 86 as shown in attached photos. Hope you can help. Thanks in advance Greg ... (cont.)

I believe this is the 15-177 but I wanted to be 100% sure. The previous order I made I ordered the incorrect part a Pivot Lock Shoe bot realizing this had a coil

I am looking for complete replacements for these screen door handles. both left and right handed versions.

Looking to replace this material in my sliding glass door

One door is stationary. The other door slides back-and-forth with a wheel at the front and the back of the door.

Need asap if you have it. Must be exactly like the one in the pic

There are many of these broken in my windows. The windows are from the 1970s era. I am asking if there still are duplicates or some other type to use. Thank you.

Trying to locate this operator. Not sure if I need one without a cover a need to purchase a cover separately. The one I need is all one piece. The arm measures approximately 13 1/2 inches from the base of operator. Also I added a pic showing how the extended arm is connected to the sash. It has a sw ... (cont.)

Could you please help us find replacement parts for this window lock? Thank you

Looking for full replacement part, same finish of possible. For a customer of mine. Did not have access to the lock itself.

Dear Swisco, Can you help me find these or equivalents? I need them with the 1-1/4" wheels in stainless steel. F3728-1.25PS ROLLER ASSEMBLY WITH 1 1/4? PRECISION PLUS STEEL WHEEL (Also available with 1 1/4? Precision Plus+(tm) Nylon, Stainless) Categories: Patio Door Hardware, Single Wheel Assemb ... (cont.)

so all four springs broke and most of the posts sheered off.

do you have this