Viewing all customer Discussions for:

Other

I need 14 replacement wheels

Would like a dozen

I need at least a dozen of these channel balances for a rental home in Sicklerville. The current ones are frozen and non functional. The metal part is 29" long. My name is Ron. I'm a handyman working for the homeowner.

Part No.#8244 is stamped onto the underside of my broken Sash Lock. My Harvey Windows were installed when my house was newly built in 1999. As the sash lock sits on the top of the lower inside window, its width = 2 7/8", by 3/4" deep. The (2) holes on this Sash Lock are 2 1/4" apart; measuring from ... (cont.)

The Pivot Lock Shoes are broken on 4 sashes.

I'm looking for four 21" and two 15" window channel balance.

Not sure what the 2?C , might be 23C Thank you for your help Linda

channel length 21 5/8 in Stamp 21 4 Milgard 2010 Need two pieces, for one window

Hi, I removed this coil balance from one side of my double-hung vinyl window. Both coils have broken. The cover shows CertainTeed. The window size is 32 1/2 x 25 1/2 inches double pane. Do you have the replacement part? Thanks Ron O

I cannot get the screw to go into the slider and latching piece. Also the screw to secure the handle to the screen frame. Thanks Ernie

I can't seem to find which window lock model these are. I can't find a serial number on the lock or window. Have tried a few replacments off amazon but nothing has fit. I'd rather replace the locks then get whole new windows. I would need about 20 of these locks

needto replace them i could not find model #

I need the part that snaps in where the frame meet the glass. It's kinda like a triangle

Hello, I need to replace three Roto crank units with serial # 0P052020. Can some tell me what parts I need to purchase?

Need to replace these.

arm crank andersen window

I purchased a 1950 brick home a year ago that is in exhalant condition that has oak wood windows in the brick breezeway that are in very good condition except for needing re-glazed. I will be removing the windows to make re-glazing them easier and a better job. They are non-tilt and have spiral bala ... (cont.)

Lost one of these. It slides into the hinge track on a Marvin Casement. Any ideas on a replacement?

Hi My wheel came off my door but as you could see one of the photos it looks like the part that it attaches to, snapped and is in the latch

Mercer Ind. 89 - 1 is engraved in the metal frame. House was built in 1989. These are the original windows.