Viewing all customer Discussions for:

Other

I"m looking for the plastic I have attached pictures of for my cabinet drawer. Thank you Adolfo

Hi: I have old aluminum storms and screens.I have attached pictures of what I am looking for.I have at least 29 windows and each require a left- and right-hand latch.Please let me know if you have any or what I can do to replace them.Thanksmike

have a non tilt window and trying to identify parts to replace. can't figure out how to install either cause this window doesn't haver the clips inside the window Fram track at the upper part of frame that on other windows pop out so the bracket has something to hold bracket in place once its under ... (cont.)

Hello, the size fits the handle but the inner spindle box is too small. I believe mine is almost 1/4-1/2. So you have the proper size? This is for a storm door that was purchased at Home Depot around 20 years ago.

Need to know what kind of hinge this is.

Need a channel balance replacement for windows in our home. The length of the metal part is 28 inches. I used your guide from the instruction video to measure it. The cord in the balance is broken and I need a replacement. Thanks. Abhi

B314P19177 sash balancer B314P19177 Vintage 1977

length of metal = 32 and 3/4" (and is 9/16" wide) stamp = 32 4 (with space between 2 and 4), and, closer to the shoe ans smaller font "BS and upsidedown 1" and "RS" window maker = Jeld-wen, likely made between 2000 and 2006-10? shoe has wheel (is "extended-travel channel balance" by your website tr ... (cont.)

When I opened my window, the window balance came apart. The window balance on the other side remains intact, but I didn't remove. The length of the balance is 30 inches and width is 1/2 inch. The balance is labeled "29HD-45"

I am looking for key stock, roughly quarter inch thick 3 1/2 inches long, three holes, one and one hole the other any help would be grateful where to find. Thank you.

11-4 BSI 0A is what's on it

I am working on Certainteed Bryan Mawr II windows. I need 4 pivot shoes- they look like your 15-192 but are there others that look the same? I also need 4 balance springs that attach to the pivot shoes- mine are marked 408 J . I'm also looking for 14 feet of bulb seal. To replace on 5 windows ... (cont.)

Looking for this sliding glass door wheels. Can you help?

The 3 parts make up a Center drawer glide for ChildCraft dresser. The glide is 15-1/2" long.

Hi, This tilt latch is on a metal frame window surface mounted. It has no name or numbers. Any suggestions? Thank you, Barry

Just need to replace what seems to have snapped off. Or if maybe the last tenant threw some parts away, replace them. I've never worked with this style before.

The picture does not include the inner workings of the tilt latch. Dimensions are 3-5/16" L, 1-3/16" W, 5/16" H, and 1-7/8" hole to hole. I need one left and two rights.

Dim are: 2 5/8" long Barely under 3/4" wide on the top, bottom width that slides into window 9/16" Total thickness 7/16" Simonton window about 18-20 years old.

Text is "21 9 B.S.I. PL"

26-5/8 ths length qty 2 needed