Viewing all customer Discussions for:

Other

Insert for track measures 3/16. Width of seal base appears to be 5/8. Not sure of size of foam filled seal as it has mashed flat over the years.

Hello. Purchased a new home. Bottom of this window frame is broken. Window closes down but there is a gap to the outside. The broken piece usually sits in front of the where the window comes down and has an internal pile strip for some insulation. Measures 29.75 in wide. Do you sell anything similar ... (cont.)

I am trying to find a latch keeper for my window. I have attached a photo of the broken latch keeper and the latch. Regards Ron

I'm looking for lock replacement for my sliding door. The handle is jammed, it doesn't u lock unless I push the pin in the middle of the plate. Attached are some pictures. Do you carry that type of lock. Thank you Eddy

I have three windows in which the spring mechanisms have failed. I'd like to replace them so I would need 6 total spring assemblies. I've enclosed photos. The length of the metal portion not including tabs is 33 inches. Thank you.

I have wood JELD-WEN windows that need replacement weather stripping. The identifiers on the window corner: JELD-WEN C W IGCC (R) CBA-IGMAC CIG-3 4-04 LOW E 172-4 Jeld-Wen calls them WENCO. Is replacement available? I also need balances Type B for same windows. Thanks! Ida

Trying to locate replacement plastic glazing bead around crank out windows in sun room

I have what appears to be a Pella Proline double hung tilt window manufactured 2002. The cord on the channel balance broke. I have attached pictures of the old channel balance. Hopefully you can help me with a replacement pair.

2 sets of 2 channel balances for a total of 4 needed to replace on Gapco code 50-3, HP series windows, will need additional balances for other size Gapco windows but want to see what prices are, how long to receive order, and if they work properly. thanks

Hello, I need some help finding the type of window balance to purchase to replace damaged window balances for a double hung sash window. Sash weight is 20 lbs, photos attached.

Good morning, One of the rivets on the hardware has worried loosed and a temporary securing is holding for now. Can you recommend the proper replacement part? Thanks, Bryan

Good morning, A screen took a dive from second story window and damaged two of the four corners on the screen. Can you suggest the proper part? Thanks, Bryan

Hi, I am just wondering if you have any above window handle in stock? Please advise. The window handle is made by Giesse.

I need to replace 1 of 2 casement windows on a bay window unit. What specific information do you require for me to order the proper part? Looking from the exterior, it is the casement sash on the right. The close up pictures uploaded are of the sash that doesn't require replacement. ... (cont.)

Hi I'm in the UK and trying to source two replacement roller kits to replace Stanley 00-5024. I have seen comments saying to use 23-222B or C but not sure which. Can you advise which one to use and how to source in the UK please Thanks Neill

I am pretty sure this is a Interlock Nova Single Arm Casement Operator. It has the "Interlock" name molded into the base. It is on my CGI casement window that was installed new in 2014. The window is hinged on the right side when looking at the window from outside.

Couldn't find a manufacture on window, but window opening measures 22-1/2" x 62-1/2". the actual handle and gear box are roughly 4-1/2". Wondering if you guys have a replacement that would work. Thanks.

We are looking spare units of this product; Hinge cabinet of MEPLA, ref; 654.35C.53.CC Made in W. Germany, as it is written on the Hinge WERE WE CAN BUY THEM. WAITING FOR ONE ANSWER.

Hi I am needing to identify which replacement tilt release would work best to match the design I uploaded. I can find similar items but the dimensions are not the same.

The mechanism is longer opening the window. I don't know the window brand and I don't have any serial numbers. I need left and right opening mechanisms.